Executive summary

In 2025, several threat actors exploited CVE-2025-53770 and CVE-2025-53771 (ToolShell vulnerabilities) in on-premises Microsoft SharePoint to achieve remote code execution through crafted HTTP requests. One of the threat actors deployed ransomware on the target’s systems after successful exploitation. Microsoft attributed this ransomware-related ToolShell activity to Storm-2603, distinguishing it from other actors whose observed activity was primarily focused on credential theft, espionage, and data exfiltration.

In December, our retrospective analysis identified activity consistent with Storm-2603’s TTPs. This activity involved the attacker using the IIS worker process as an in-memory bridge to the customer’s infrastructure, keeping the access and control layer entirely within w3wp.exe without writing anything to disk. Although subsequent post-exploitation activity generated disk artifacts, the bridge used to maintain access remained memory-resident.

Let’s look in more detail at this attack.

Intrusion timeline: Strategic latency and exploitation

The intrusion analyzed in this report occurred in two stages, with a temporal gap between initial access and subsequent exploitation activity. The attack timeline was as follows:

• Dec 20 – Vulnerability fingerprinting: A single HTTP request targeted a SharePoint administrative endpoint associated with the ToolPane component to determine whether the host was vulnerable to CVE-2025-53770.
• Dec 21-23 – Tactical latency: A three-day period of silence followed the initial probe, separating the vulnerability fingerprinting from subsequent malicious activity and potentially reducing the likelihood of immediate detection.
• Dec 24 – High-intensity re-engagement: On Christmas Eve, when security staffing at many companies is reduced, the full RCE chain was executed through the IIS worker process (w3wp.exe) on the same endpoint as the initial probe.
• Dec 26 – Incident discovery: The three-day gap initially prevented the December 20 probe from being correlated with subsequent malicious activity, marking the event as low priority. Retrospective analysis established that the probe was the initial phase of the subsequent intrusion.

Initial access validation phase

Vulnerability fingerprinting

A vulnerability fingerprinting request on December 20 marked the first observed interaction with the target. The request originated from infrastructure associated with ONYPHE, an internet-scale attack surface discovery and management platform for identifying exposed assets, vulnerabilities, and cyberthreats. Unlike widely used tools such as Shodan and Censys, which merely provide a list of internet-facing assets correlated with the open-source data about known vulnerabilities, ONYPHE actually checks if the target system is vulnerable.

The request characteristics were consistent with ONYPHE’s vulnerability checks, which use active, non-intrusive probes to identify internet-exposed systems vulnerable to specific CVEs. For ToolShell, ONYPHE adopted the approach used by Niels Hofmans (hazcod). Namely, it attempts to inject a harmless marker into the target server to find out if it is vulnerable.

This phase served as a validation step against the SharePoint execution surface exposed over HTTP:

• The target processed structured requests through the ASP.NET pipeline without rejection.
• The request path reached application logic capable of handling serialized input.
• No defensive controls interrupted or altered the execution flow at the application boundary.

Approximately 12 minutes later, a second inbound connection originated from infrastructure associated with Pfcloud UG, a provider operating under a bulletproof hosting (BPH) model. Given the timing and the IP’s documented history of scanning and abusive activity, the connection may represent follow-on reconnaissance against the newly identified target. No exploitation was attempted at this stage.

Active exploitation: Santa took your data and left a backdoor

The main malicious activity occurred on December 24. The actor targeted the same SharePoint host with a crafted request from 45.91.94.204 (45.91.92.0/22, ASN 63473, HostHatch, LLC). This resulted in a webshell execution within the IIS worker process (w3wp.exe). The payload was not written to disk; rather, it was loaded directly into the ASP.NET runtime and used during subsequent request processing. The implant remained resident for the lifetime of the affected application domain. This runtime state was lost when the application pool was recycled or IIS was restarted.

Attack originated from an SPN node

The IP address 45.91.94.204 is a Safing Privacy Network (SPN) node. SPN routes each connection through a multilayer VPN path with multiple relay nodes that can obscure the originating IP.

SPN promotes itself as a network that offers strong privacy protection for internet traffic. Its infrastructure resembles Tor’s in many ways, but with some differences. It features the following capabilities:

• Speed: Near-VPN performance for high-speed data transfer.
• Layer 3 support: Supports multiple protocols like TCP, UDP, ICMP (unlike Tor, which only supports TCP).
• App-routing: Direct tunneling without a browser.
• Multi-identity: Simultaneous exit nodes to bypass IP rate limits.
• Fixed-size packets and padding make it harder to analyze its traffic.

It is less common than Tor, and frequently bypasses standard Tor blocklists.

Webshell architecture

The webshell the attackers injected into the w3wp.exe runtime is a multi-module in-memory framework, where execution is orchestrated through the main component (G.cs) and extended via multiple functional units across namespaces.

The implementation follows a modular C# project structure in which each capability is isolated into its own compilation unit and invoked dynamically at runtime.

“G.cs” pipeline control and C2

Pipeline control

The main webshell component is G.cs. It orchestrates the implant’s execution context, lifecycle, C2 and session management.

To ensure persistence within the runtime, G.cs performs the following actions:

• Registers a custom VirtualPathProvider using the non-public RegisterVirtualPassProviderInternal method from the ASP.NET HostingEnvironment class so that ASP.NET uses it for virtual-path processing. The provider is automatically added to the chain of registered virtual path providers.
  
• Delegates the provider’s .NET Remoting lifetime policy to the previous provider in the chain, preserving the existing lifetime behavior.
  

Additionally, to evade defenses and enable the VirtualPathProvider to be registered even if the application in whose AppDomain the webshell is running is precompiled, the module implements the trust control subversion (T1553) technique:

• Uses reflection to check if the application is precompiled.
• Extracts pointers for internal state fields for the BuildManager class, which manages application compilation, and modifies them at runtime.
  
• Uses reflection once again to force runtime injection.

G.cs uses the GetCacheKey() function as the interception point for the virtual path processing flow. It processes incoming requests to the SharePoint server and checks their headers to filter out requests from the attacker.

The specific User-Agent in the request headers triggers the webshell execution. If the request doesn’t match this condition, the implant remains dormant, making its traffic harder to recognize.

Command and control layer (in-memory transport)

The same core module (G.cs) implements the communication layer.

Instead of relying on external frameworks or standard beacons, it uses a custom binary protocol with XOR-based obfuscation to exchange data with the C2. These communications blend into normal application traffic. The module uses the GetCacheKey() hook to intercept standard HTTP requests. When a specific User-Agent is detected in the request headers, the module parses it, extracts the payload, and establishes a TCP connection to a target host inside the target’s network if needed.

G.cs establishes a full-duplex proxy tunnel to support interactive control. It stores active target sockets in memory to pair concurrent HTTP read and write channels.

TCP connections from the C2 server to arbitrary hosts inside the target network are supported for pivoting and lateral movement. The traffic is proxied through the SharePoint host.

As can be seen in the screenshots, the attackers used the suo5 tool to implement traffic proxying. Its authors promote it as a stable forward-proxying tool for scenarios where outbound internet connections are prohibited.

To increase its performance, G.cs manipulates ThreadPool by raising its limits for concurrent operations and maximum timeout.

“Prog.cs”: Execution entry point and task dispatcher

Prog.cs is the entry point that receives command-line arguments and passes them to uk/London.cs. The latter acts as the orchestrator, handling command parsing and privilege escalation (via named pipe impersonation). We’ll review it in more detail later. If the “suo5” command is provided, London.cs triggers G.cs to hook into the ASP.NET runtime as a memory shell. Once active, G.cs independently processes incoming web traffic inside the web server memory.

Host interaction modules

The following modules provide direct system interaction capabilities, each implemented as a separate unit. London.cs triggers these modules when it receives a corresponding command from Prog.cs.

“FileDownloader.cs”

The FileDownloader.cs module downloads arbitrary files from external URLs provided by the C2. It stores the downloaded files in the Program Data directory without any user interaction.

“LoggedOnUsers.cs”

This module enumerates logged-on users and identifies their session types (interactive, service, remote). The results are stored in memory. The attackers can retrieve them using the proxy and tunneling capabilities provided by G.cs.

“ProcessList.cs”

This module lists running processes with full paths to the corresponding executables on the disk. The results are stored in memory and the attackers can retrieve them via G.cs.

“NetworkInfo.cs”

This module extracts information about existing network connections, including protocols, local and remote IPs and ports, and connection state. It also enumerates network interfaces and headers. The results are stored in memory and can be retrieved by the attackers via G.cs.

“MSI.cs”

This module silently installs and executes MSI packages previously downloaded by FileDownloader.cs.

“User.cs”

This module creates administrative accounts using the native SAM RPC subsystem (SAMRPCNative namespace) rather than standard command-line tooling. This may indicate an attempt to evade detection and provide the attackers with privileged stealthy access to target systems that persists after the webshell has finished its work.

SAMRPCNative

The SAMRPCNative namespace implements a low-level C# P/Invoke wrapper for the native Windows samlib.dll library, comprising three types: SAMStructs.cs, SAMMethods.cs, and SAMEnums.cs.

“SAMEnums.cs”

Implements structured bitwise lists and constant flags mapping numeric codes to their security meaning in SAM, and translates system status return codes.

“SAMStructs.cs”

Defines native data structures required for P/Invoke memory alignment and for marshalling. It securely formats and aligns data structures.

“SAMMethods.cs”

Contains external API declarations (P/Invoke) imported from samlib.dll to perform actions such as connecting to the SAM server, creating users and opening domains.

This layer is crucial for the attackers because it enables account operations.

Privilege escalation

The uk namespace contains offensive primitives for privilege escalation. To elevate privileges to SYSTEM, it uses a local token impersonation technique via the Encrypting File System Remote Protocol (EFSRPC) interface adopted from the EfsPotato tool.

This functionality is implemented in the uk/London class. It creates a malicious named pipe while the EfsrTiny class (a tiny version of the EfsPotato tool) connects to the LSASS.exe RPC server. Then it’s London.RpcThread function calls the EfsRpcEncryptFileSrv function from EfsrTiny with a crafted \\localhost path. This tricks LSASS.exe into connecting back to the attacker’s named pipe. Finally, the London.Exp function uses ImpersonateNamedPipeClient to coerce and impersonate the LSASS.exe token and spawn a new process via CreateProcessAsUser with SYSTEM privileges. As the webshell resides in the IIS worker process, it has the necessary SeImpersonatePrivilege to perform this technique.

The uk namespace also implements a minimal MSRPC client layer by explicitly defining structures such as RPC_CLIENT_INTERFACE and MIDL_STUB_DESC, thereby spoofing an interface stub. This enables direct interaction with the Windows RPC runtime (Rpcrt4.dll) without relying on MIDL-generated stubs or higher-level RPC abstractions. This provides direct control over binding and marshaling that goes beyond the constraints of standard client APIs.

Post-exploitation activity

Shortly after the webshell injection, the infected worker process spawned msiexec.exe to install a remote MSI payload hosted in Supabase cloud storage. The payload was Velociraptor, an open-source digital forensics and incident response tool – namely version 0.73.4.0 vulnerable to CVE-2025-6264 – that the attackers abused for command execution on the target network.

In October 2025, Cisco Talos reported Velociraptor being leveraged by threat actors as a post-compromise execution framework and attributed this activity to Storm-2603. This tool enables arbitrary command execution, and can be used for various purposes. In our case, it was used for persistence, discovery, data collection and payload execution.

The threat actor used Velociraptor to deploy multiple independent tunneling mechanisms, including Zoho Assist-Unattended Support for unauthorized remote access, VS Code CLI tunneling, Cloudflare Tunnel, and a lightweight reverse proxy utility. By doing so, they attempted to maintain access even if some of their tools were detected and deleted. At this stage, they also no longer depended on the IIS worker process lifecycle and ToolShell vulnerability.

EDR-killing attempts

Once the threat actor had access to the target system, they were able to upload a vulnerable driver that is used by many attackers to terminate EDR solutions. We were able to detect the main driver at C:\programdata\rsndispot.sys (054a32d6033b1744dca7f49b2e466ea2). In addition, the adversary used a malicious DLL (2d9ebf9c042f596f435865b40edad928) in a sideloading attack. This DLL was identified as Warlock ransomware’s AV killer. It was possibly intended to kill security solutions using the vulnerable rsndispot.sys driver.

Ransomware deployment attempt

The attackers made attempts to launch ransomware on the compromised system. However, the Proactive Defense Module in Kaspersky Endpoint Security blocked the ransomware process, effectively preventing this activity. The malware DLL we obtained was identified as Warlock ransomware.

What defenders really need to look for

ToolPane deserialization and CLR artifacts

When the attackers tried to access ToolPane, both the dynamically compiled App_Web_toolpane.aspx assembly and the Microsoft.GeneratedCode helper assembly were present within the same application domain.

Both assemblies are used in legitimate scenarios. App_Web_* assemblies are generated during normal ASP.NET page compilation, while Microsoft.GeneratedCode is typically produced by the XmlSerializer during legitimate serialization workflows. However, a request to the ToolPane endpoint that results in immediate loading of Microsoft.GeneratedCode within the same execution window indicates that the runtime is processing serialized data supplied through the request.

Detecting deserialization exploitation

First, it is highly recommended to read this article (in Russian) on how deserialization exploit attempts in the CLR should be detected, with examples of YARA rules and monitoring recommendations. A summary of the main idea of the detection logic is provided below.

Deserialization vulnerabilities should be treated as a distinct class of exploitation events. In the CLR, deserialization is not merely the conversion of bytes into values – it is the reconstruction of an object graph from an incoming stream. Serialization and deserialization are performed by formatters. One of the most widely used formatters is BinaryFormatter. It uses the NRBF format, which defines the stream as a sequence of records describing classes, arrays, primitives, and references between objects. The shape of the resulting graph is determined by the data supplied to the deserializer. This means that the input stream defines not only the values but also the specific types, relationships, and lifecycle points that the runtime must materialize.

Microsoft states explicitly that BinaryFormatter is unsafe and cannot be made safe; beginning with .NET 9, the in-box implementation is effectively removed from ordinary use. However, Microsoft continues to use it in its products, including SharePoint, because it is powerful and easy to use. To fix BinaryFormatter-related issues, architectural changes are needed. Similar warnings also apply to related unsafe mechanisms, including LosFormatter (used in the vulnerable page).

The primary risk of unsafe deserialization is that the CLR may resolve unexpected types, instantiate objects outside normal constructor invariants, and invoke special lifecycle mechanisms such as ISerializable, IObjectReference, IDeserializationCallback, and methods marked [OnDeserialized]. In other words, the attacker-controlled data can force the runtime to construct a graph containing types with executable side effects.

A practical detection strategy should therefore focus on graph-construction artifacts. CLR loader events identify the relevant assemblies and application domains. Memory and metadata inspection then reveal the type names and generated serializer structures associated with the suspected gadget chain. In ToolShell-like scenarios, unsafe deserialization usually produces helper assemblies (evidence in loader events) with metadata containing fully qualified type names, gadget class names, and string representations of the constructed generic types (just scan via YARA for it). In our case, the artifacts to look for include Microsoft.GeneratedCode, App_Web_toolpane.aspx* (evidence of deserialization in loader events) as well as strings identifying ObjectDataProvider, ExpandedWrapper, and LosFormatter (evidence that the input stream was deserialized into dangerous objects). Note that these indicators are not significant in isolation; their value lies in the fact that they show the runtime has already received data requiring helper code generation to reconstruct a dangerous object graph.

Gadget objects that exploit vulnerabilities like those associated with ToolShell are conveniently represented in corpus-style tooling such as ysoserial.net/YSoNet, which aggregate known gadget chains for unsafe .NET deserialization. For defensive purposes, the value of these projects lies not in their offensive capability but in the catalog of types and structures that can be searched for in streams, memory, and helper assemblies. The presence of any of them in memory or in a helper assembly should be treated as a strong indicator of exploitation.

To simplify deserialization exploit detection, we created a tool named CLRDeserializationExploitFinder. It can detect ToolShell exploitation attempts, as well as other gadget chains covered by ysoserial.net.

Detecting a VPP-based webshell/runtime implant

A mechanism based on VirtualPathProvider should be treated as a separate class of runtime implant (no files involved). In ASP.NET, HostingEnvironment.RegisterVirtualPathProvider registers a new virtual-path provider (VPP) in the application’s compilation system. Once registered, the application can serve virtual paths during dynamic compilation as though they were ordinary on-disk pages. Dynamic compilation does not require the payload to exist as a file in the filesystem. It operates entirely within the trust boundary of the application itself. During the compilation process, temporary files may be generated, but they cannot be treated as reliable forensic artifacts. Because VPPs can also be used for legitimate purposes, the defensive model should begin with an inventory of the legitimate VirtualPathProvider implementations. In all other cases, the registration or use of a new VPP should be considered anomalous.

To see how the dynamic generation of virtual pages using ASP.NET, IIS, and the CLR works, and to learn how to detect such activity, use our project VirtualPathProvider Lab.

The most useful telemetry source for this technique is the Microsoft-Windows-IIS-Configuration ETW provider. To detect virtual paths, events 25 and 47 are of primary value. Event 25 records the mapping of ConfigPath to PhysicalPath, and event 47 records the mapping of the configuration path to a directory. In the case of a VPP-backed path, these events create an inconsistency: IIS and ASP.NET behave as if the path has a physical representation, while the corresponding file does not exist on disk. In the example provided by VirtualPathProvider Lab, this appears as a mapping of the virtual resource googlecheck.aspx to a physical path where no real file is present. This discrepancy between configuration resolution and filesystem reality is the primary indicator of virtual content.

The second indicator is more negative than positive. For disk-backed files, IIS normally creates a FileChangeNotificationMonitor chain, as reflected in events 17, 18, 19, and 21. For virtual paths served by a custom VirtualPathProvider, this chain is absent or does not match the normal profile of an ordinary file because there is no physical object or corresponding on-disk change lifecycle. Consequently, the presence of positive events 25 and 47 combined with the absence of the expected events 17, 18, 19, and 21 for the same path forms a reliable detection pattern: the path exists for IIS as a configuration-resolved resource, yet it is not backed by the filesystem and is not accompanied by normal file-change monitoring.

To sum up, the hunting target here is the discrepancy between how IIS/ASP.NET resolves a resource and what is actually present on the disk and in the change-monitoring chain. For known applications, such cases can be filtered through an allowlist of legitimate VirtualPathProvider implementations. Anything else should be treated as a potential runtime implant and examined using ETW, filesystem verification, and memory inspection of the w3wp.exe process.

Attribution

Microsoft tracks Storm-2603 as a standalone threat actor with no known links to other groups. While they are careful about assessing the actor’s motivation, they mention that it has previously deployed Warlock and LockBit ransomware following active exploitation of on-premises SharePoint vulnerabilities. In the analyzed incident, we observed similar SharePoint exploitation activities, as well as an EDR killer associated with Warlock ransomware and unsuccessful Warlock launch attempts.

Other documented intrusions have identified Storm-2603 as leveraging known flaws within perimeter mail gateways to achieve initial access, subsequently staging the Velociraptor framework with elevated privileges and establishing persistent encrypted tunnels via commercial remote management software to orchestrate secondary lateral movement. This aligns with the post-exploitation behavior we observed in our case. Together with the ToolShell exploitation scenario, this allows us to attribute this case to Storm-2603 with moderate confidence.

Conclusion

From the incident analyzed in this article, the main defensive lesson is that exploiting an internet-facing SharePoint server can enable fileless code execution directly inside the application trust boundary. Storm-2603 did not require a conventional dropper, persistent service, or exposed C2 endpoint; instead, it deployed a webshell inside w3wp.exe, from which tunneling, privilege escalation, credential access, and lateral movement could be orchestrated. Detection therefore needs to move beyond file-based webshell hunting toward runtime behavior, such as anomalous w3wp.exe activity, unexpected outbound connections, RPC coercion, token impersonation, and the introduction of remote-management or DFIR tooling after application compromise.

To correctly attribute malicious activity and develop appropriate response measures, defenders should reconstruct execution chains and temporal relationships across application, host, and identity layers. They should also preserve memory and IIS telemetry, and correlate low-signal reconnaissance with subsequent privileged activity rather than evaluating events in isolation. A confirmed SharePoint exploit with code execution should trigger host-level containment, persistence hunting, credential and exposed MachineKey rotation, and TTP-driven investigation rather than remediation limited to the initial exploit or known IOCs.

Kaspersky products detect the threats mentioned in this article as:

• Trojan.MSIL.Agent.gen
• Trojan.Win64.DLLhijack.cdp

Indicator of compromise

Indicator of compromise	Description
45.91.94[.]204	SPN node
0xFD91321BF7FF7245DDA9B7B5D791ACE8	vskp2 – webshell implant
hxxps://vdfccjpnedujhrzscjtq[.]supabase[.]co/storage/v1/object/public/image/v4[.]msi	Vulnerable Velociraptor package
0x3A55D8F8F29716C694671834D8C6CB29	C:\ProgramFiles\Velociraptor\Velociraptor.exe
hxxps://auth[.]qgtxtebl[.]workers[.]dev/	Velociraptor server URL
199.232.210[.]172	C2 traffic relay
0x991EC6E04413F2D4D29341C17A8A54D5	Abused legitimate VS Code
0x3D553B9061C03F891CE97D7D2E64DDEE	VS Code Insiders for tunneling
91.224.92[.]121	Bulletproof-hosted C2 server
49.51.132[.]100	SPN node
hxxps://github[.]com/cloudflare/cloudflared/releases/latest/download/cloudflared-windows-amd64[.]msi	Abused legitimate tunneling tool
0x2C32E44A013CBFC5A323EFB7694701D2	Abused tunneling tool executable
hxxps://files[.]catbox[.]moe/8f7vex[.]msi	Abused Zoho Assist Unattended Agent download URL
0x112A86ECA3CB5A0B5E20AB744CC5AF93	7z.exe renamed for sideloading
0xA930F81E3FB0A226EC5904D9043A17B8	C:\ProgramFiles(x86)\ZohoMeeting\UnAttended\ZohoMeeting.7z
204.76.203[.]219	Bulletproof-hosted C2 server
0x054a32d6033b1744dca7f49b2e466ea2	Vulnerable driver

Introduction

As part of proactive threat monitoring, Kaspersky’s Cyber Threat Intelligence team identified a malicious campaign involving C2 agents controlled by artificial intelligence. Confirmed victims of the campaign included organizations in the education sector in several countries across Africa and Latin America. CyberStrikeAI played a key role in the post-exploitation phase. This is an open-source framework in which an LLM orchestrator on the command-and-control server plans actions, selects tools, and generates commands, while an implant executes them on compromised hosts. Using CyberStrikeAI, the attackers progressed from reconnaissance to full domain compromise.

According to our data, this is one of the first public descriptions of a compromise involving an LLM in the wild. The campaign we discovered clearly illustrates how the role of AI in attackers’ arsenals is evolving: until recently, language models were used primarily during preparatory stages – for writing phishing emails, debugging code, or searching for vulnerabilities. Now, however, they are being embedded into the very core of the attack, automating actions at every stage: payload execution, persistence on the host, discovery, lateral movement, and, finally, data collection and exfiltration. Post-exploitation – the stage that traditionally required manual work by an experienced operator – plays a particularly significant role here.

A key feature of the scheme using the CyberStrikeAI framework is that the implant ceases to be a simple tool for executing the operator’s commands. Decisions are distributed across two levels: the operator defines the task in general terms, while the model determines how to execute it – specifically, which commands to send to the host and in what sequence. Thus, the strategic planning remains with the human, while the choice of technical steps is delegated to the model, and the implant executes the model’s decisions.

To understand how this scheme works in practice, let’s examine the chain of actions taken by the attackers, as reconstructed by our analysts during the incident investigation.

Timeline of the attack

Let’s examine the timeline of the attack using an example from one incident within the detected campaign.

The first phase follows a standard approach: a human operator gains access to the victim’s infrastructure via a compromised SQL Server (version 16.0.1000), then collects basic information about the host, deploys tools, and conducts network reconnaissance. All of this activity takes nearly a day, followed by a two-week pause.

The second phase is fundamentally different. The first step involves deploying the CyberStrikeAI C2 agent, which receives commands from a server-based LLM orchestrator. During the second phase, the agent performs the following:

• establishing persistence and conducting local reconnaissance within 2 minutes;
• conducting domain reconnaissance over the next 5 hours;
• after a brief pause of several days, moving on to the final stage – lateral movement via SMB and WMI, mass credential dumping on hosts, and database export – with the entire operation taking no more than one hour.

We’ll discuss these stages in more detail in the next section.

Technical details

CyberStrikeAI overview

CyberStrikeAI is an open-source, modular platform written in Go for automating penetration testing. Its key feature is combining LLM-based attack orchestration and a built-in C2 server with agents (beacons) within a single server process.

The entire “intelligent” layer is isolated on the control server. C2 functions (calling reconnaissance and exploitation utilities, managing webshell connections, assigning tasks to agents, and reading results) are available to the model as MCP tools. The implant is a classic C2 agent with no AI functionality – no API keys, no calls to AI service APIs, and no autonomous logic. It periodically polls the listener server via HTTP/S, TCP, or WebSocket, executes shell commands, and interacts with the file system. To the victim, this activity looks like a typical remote-control session, where a server-side LLM orchestrator queues tasks instead of a live operator. The LLM influences how decisions are made, but not how the corresponding commands are delivered to the host.

Although CyberStrikeAI is publicly available, specific instances of the framework can be linked to specific attackers or campaigns. Detection and attribution are possible based on the following artifacts:

• Control panel: Upon launch, a self-signed TLS certificate is generated, with the framework’s name appearing in the issuer and subject fields. The certificate is created in memory at each startup, so the not_before field effectively records the time the process was launched. Accordingly, as with Cobalt Strike, the chronology of restarts can be reconstructed from the scan history.
  

  CyberStrikeAI control panel’s self-signed TLS certificate

• Implant: The build metadata (go version -m) contains a path to the main package, which includes data pointing to the built-in CyberStrikeAI generator – a temporary directory with the build identifier. This path is identical for all payloads, making it a reliable signature. Additionally, the build info field contains version control system metadata, which can be used to compare samples against one another.
• Authentication: When communicating with the server, the implant sends an X-Implant-Token header with a fixed value in the HTTP request. The token is unique to each C2 server and is embedded into the malicious payload during the build phase; therefore, it serves as both a network indicator and a sign that the samples belong to the same server.

It should be noted that the implant version does not reflect the server version. The implant can operate for months while the operator updates the server-side components: listener configurations and keys are preserved during updates. In the incidents we detected, we observed the use of a single agent version throughout the entire incident. In such cases, the sample’s build date may indicate the earliest possible deployment date of the CyberStrikeAI infrastructure, but it still does not provide an estimate of the compromise duration.

Execution & Privilege Escalation

The first malicious commands on the victims’ systems in the campaign under investigation originated from the sqlservr.exe process, indicating the likely initial access vector and the context in which the attackers gained the ability to execute code. It is important to note that the commands marked as having been executed prior to agent installation were executed manually by the attacker specifically within the context of this process. At this stage, we are not yet dealing with automated implant activity, but rather with manual actions by the operator.

Before launching the agent on the machines, the attackers checked for its presence using a PowerShell script, from which we can deduce its default deployment paths: C:\Windows\Temp\, C:\Windows\, C:\ProgramData\, C:\Temp. At the same time, the attacker can disguise the agent’s name as that of a legitimate system process. In the example below, it mimics svchost.exe (svchosts.exe)

Like most C2 agents for Windows, CyberStrikeAI uses PowerShell to execute its payload. When a request is received from the operator, the commands to be executed are additionally encoded in Base64 to bypass keyword-based detection.

Decoded form of the command:

When administrative privileges were available (for example, a domain administrator account), instead of executing commands directly, the agent on remote hosts often created scheduled tasks so that the malicious payload would run with SYSTEM privileges:

An alternative method that does not use schtasks utility is to create a task via the Schedule.Service COM object:

The payload (p1.ps1) from the example above is a reverse shell that connects to the server at 185.186.245[.]144:5501:

The p1.ps1 payload and similar scripts were distributed across the network using shared network administrative folders and the WMI protocol, which we will describe in more detail in the Lateral Movement section.

Stealth

In addition to encoding commands in Base64 and obfuscating SQL/LDAP queries – which we will describe in the Collection & Exfiltration and Discovery sections, respectively – the attackers split the malicious payload into multiple files. It is noteworthy that the scripts were transmitted in this manner even before the agent was installed – that is, at a stage where human intervention is typically required – yet they clearly bear the hallmarks of being generated by an LLM.

Below is a sequential record of several script fragments written to the file d3.b64.

Subsequently, the attackers used the certutil utility to decode the resulting file and executed it with the following command:

Once assembled and decoded, the script’s contents looked like this:

The script is a tool for decrypting DPAPI secrets from the file C:\ProgramData\dsn_line.txt. This file, in turn, is populated by the following command, which searches for a DSN string containing connection settings in the SQL Server Reporting Services configuration file rsreportserver.config and copies its contents to dsn_line.txt.

It is worth noting that some of the scripts delivered and executed as described above contain comments in Chinese (##  –  researcher’s comments).

Persistence

If the CyberStrikeAI implant was successfully delivered, the first step was to establish persistence on the target system. To do this, the agent created a scheduled task named SystemUpdate, which specified the path to the implant as the action to be performed:

Analysis of the framework’s source code revealed an alternative method of persistence: by adding a value to the registry key HKCU\Software\Microsoft\Windows\CurrentVersion\Run, where the name of the created value matches the task name (SystemUpdate).

Agent persistence on Linux systems is also implemented in two ways – by adding the entry @reboot <path_to_beacon> & to the user’s crontab (in which case the process runs at system startup), or by adding the line (nohup <path_to_beacon> &>/dev/null &) to ~/.bashrc (in which case the agent starts when an interactive bash shell is opened).

It is worth noting that the choice of a specific persistence method is delegated to the LLM connected to CyberStrikeAI. However, thanks to the human-in-the-loop (HITL) mechanism, the operator retains full control over the process: commands generated by the model may require manual approval or correction before they are executed.

Discovery

Local Discovery

Before installing the agent on a compromised host, the attackers manually gathered basic system information using a fairly trivial set of commands:

The attackers also manually checked for internet access and obtained the external IP addresses of the compromised machines using the Chinese service dnslog[.]cn. The service generates a random third-level domain, after which the attackers attempt to resolve it on the compromised machine.

If the machine has internet access, the request succeeds, and the attackers obtain the external IP address of the compromised device on the service’s page.

For reconnaissance purposes, the agent generates a more complex script designed to map out a path for further privilege escalation by compromising SCCM or exploiting msiexec (the AlwaysInstallElevated key):

Additionally, to find ways to elevate privileges locally, the agent executed scripts to inventory services running under domain accounts and tasks running under the SYSTEM account:

During their activity, the attackers periodically checked for Microsoft Defender detections:

Remote Discovery

After gathering information about the compromised host, the attackers proceeded to conduct reconnaissance within the network. During the preparatory phase of the attack, they manually collected additional information about remote hosts using the net.exe utility.

During the main phase, the agent used PowerShell’s built-in functionality to detect accessible hosts without relying on additional utilities (such as nmap or fscan):

Additionally, relevant LDAP queries to Active Directory objects helped build a network map:

Furthermore, the presence of the installed agent on remote hosts was verified using WMI:

Domain Discovery

The next step was to gather information about the victims’ domains. To this end, before installing the agent, the attackers used standard OS utilities:

However, later on, using the CyberStrikeAI implant, reconnaissance was carried out via generated PowerShell scripts:

In addition to basic domain information, the agent performed LDAP queries to gather information for Kerberoasting and AS-REP Roasting attacks:

Finally, the agent was used to check the domain for the presence of LAPS and Microsoft Azure:

To detect signs of Microsoft Azure usage within the infrastructure, the attackers also searched for the .azcopy directory – created by the AzCopy (Microsoft Azure Storage Copy) utility – in users’ home directories:

Credential Access

After successfully conducting reconnaissance and mapping the network, the attackers moved on to the next stage – dumping credentials. For this purpose, the agent used a classic set of LOLBINs and well-known third-party tools.

The agent dumped registry hives containing credentials using the reg.exe utility:

The agent dumped the lsass.exe process using the MiniDump function of the comsvcs.dll library. In doing so, the target process’s PID was used instead of its name to make static detection based on the command line more difficult:

After successfully compromising privileged domain accounts (specifically, the built-in domain administrator), the attackers also carried out DCSync and Golden Ticket attacks via the agent using a renamed version of the mimikatz utility:

Lateral Movement

To spread across the network using compromised accounts, the attackers employed utilities from the Impacket toolkit, specifically WMIExec, as indicated by the utility’s characteristic command line:

Once installed, the agent prefers to use standard OS mechanisms, such as shared network folders.

Another method the agent uses to remotely execute commands is the WMI protocol. In particular, the agent used it to distribute the aforementioned p1.ps1 reverse shell script. This involved using compromised user accounts with local administrator privileges on the target hosts:

A second method of lateral movement via WMI uses the Invoke-CimMethod cmdlet:

Command & Control

To deliver the aforementioned tools (malicious scripts, mimikatz, and the agent itself) to the initial nodes in the infection chain, the attackers used standard OS utilities:

After the agent is installed, it checks the availability of the C2 server’s ports. The implementation mechanisms here are virtually unlimited and depend on the “creativity” of the respective LLM agents connected to the server:

To download additional utilities, the CyberStrikeAI implant also used built-in utilities (LOLBINs). The tools could be hosted on the attackers’ own servers or downloaded directly from GitHub:

Collection & Exfiltration

The data collection phase deserves special attention. It demonstrates yet another capability of LLM orchestration – the automatic generation of SQL and LDAP queries tailored to a specific task.

In one incident during the campaign, the attackers deployed the CyberStrikeAI implant on an educational organization’s SQL server and collected information from the database via PowerShell. Here is an example of a command executed by the agent:

Normalized view of the executed script with comments:

Before accessing the data, the agent checked the privileges of the account under which it connected to the database:

In decoded form, the check looks as follows:

On network resources, file collection was preceded by a recursive directory scan to identify files of interest.

To interact with the file system, the implant provides a built-in interface that supports direct uploading and downloading of files. Files are transferred directly via the main encrypted communication channel with the C2 server (HTTP or TCP), and the data itself is encoded in Base64 and packaged into the agent’s standard JSON responses.

Another built-in capability of the implant is taking screenshots of the infected machine. As with other actions, the implant does not initiate this on its own: the command to capture the screen is issued by the LLM orchestrator, and the agent merely executes it and returns the result via the same control channel.

On Windows, the command for taking screenshots looks like this:

The Linux version looks like this:

In the incidents we detected, data collection was the final stage of the attack: the chain ended there, and we observed no further activity.

Attribution

The key artifact for attribution in this campaign is the implant’s build metadata. The attackers built the malicious payload inside a Git clone of the project, so the Go compiler embedded version control system information into the binary files – the hash and commit time, as well as the vcs.modified=true flag (analogous to the +dirty suffix) – indicating uncommitted local changes in the working copy. The combination of these fields forms a unique fingerprint for a specific build.

Based on this fingerprint, the samples are divided into two independent groups, in each of which the Windows implant and the Linux implant have completely identical build metadata. A match indicates that, within each group, both payloads were built from the same project working copy.

However, these groups do not overlap with one another. They do not share a common C2 infrastructure, and different versions of CyberStrikeAI are deployed on the command-and-control servers. In other words, the build metadata reliably links the samples within each group but does not provide grounds for linking the two groups together.

The available data does not allow us to link the activity to any known group of attackers, nor to state with certainty that the same operator is behind both campaigns. Two factors prevent this. First, the tool’s openness: CyberStrikeAI is publicly available, so different operators could have independently deployed it and assembled malicious payloads under similar conditions. Second, command generation by the model: the “signature” characteristic of a specific operator is largely shaped not by a human but by an LLM. On the one hand, this increases the diversity of commands: the same command, when generated multiple times, can look different. On the other hand, it strips them of their individual characteristics, which reduces the value of behavioral metrics for attribution.

However, the Chinese-language comments found in the attackers’ scripts and the use of Chinese services still suggest a connection between the activity and a Chinese-speaking operator. In addition, analysts noted the timing of the control servers’ restarts: since the self-signed TLS certificate is regenerated each time the process starts, its not_before field records the restart time, and most of these restarts occurred during business hours in the UTC+8 time zone.

The origin of the tool itself also indirectly points in the same direction: CyberStrikeAI was developed within the Chinese cybersecurity community and is well known there.

In summary

CyberStrikeAI is a telling – though not unique – example of a shift occurring within the class of C2 frameworks: the LLM orchestrator is no longer merely an add-on to reconnaissance but has become a control layer over post-exploitation. If HexStrike AI and similar tools cover the “find and break” phase, and Sliver/Mythic/Havoc cover the “establish a foothold and control” phase, CyberStrikeAI completes the kill chain: a single server-side process written in Go executes utilities via MCP, handles webshell connections, and assigns tasks to the implant, while the model analyzes the results and decides what to do next.

The key takeaway is that the introduction of AI into the attack chain does not yet present fundamentally new challenges for detection. All the “intelligent” work remains on the attacker’s side, while the compromised host is subjected to familiar actions: from reconnaissance via Kerberoasting and AS-REP Roasting to LSASS dumps, DCSync, and the Golden Ticket attacks. This is a typical, well-documented set of domain compromise techniques. The novelty of the attack lies not in the methods themselves, but in the speed and ease with which they were executed: AI orchestration has lowered the skill requirements for the operator, but has not taken the attack beyond what defenders already know and are capable of detecting. The timing is also telling: individual key phases of the activity (such as establishing a foothold, lateral movement, and obtaining credentials) took only a few hours, and the entire attack – from agent deployment to the compromise of domain administrators – was completed within 3–4 days.

However, the CyberStrikeAI architecture does not limit users to the scenario described. The same mechanisms allow for the on-demand assembly of more complex chains – including DPAPI secret extraction and attacks on SCCM and Azure IMDS – all of which are within reach of the same group of actors, with a relatively low skill barrier. As the models evolve, the gap between the complexity of orchestration and the level of techniques used will narrow, and the operator’s role will gradually shift from setting tasks to monitoring the model’s actions.

Detection by Kaspersky solutions

It may seem that attacks using AI agents require the creation of fundamentally new detection rules. Indeed, to detect the activity of an LLM agent installed on a host within the infrastructure, it is necessary to create detection logic based on the specific characteristics of the agents. Detection rules for this activity can be found using Hunt Hub with the following filter.

However, in the case of the attack described, a different logic applies. The main difference lies in the architecture of the attack itself: the LLM agent was not located within the corporate network perimeter. It operated remotely via a C2 agent, orchestrating actions, and left no traces of its presence in the infrastructure (such as specific API requests to local LLMs or anomalous patterns of resource consumption by hosts).

The key difference between this activity and an attack by an experienced human operator lies largely in speed. Tactically, technically, and methodologically, AI, for the most part, uses exactly the same tools, utilities, and techniques as a human penetration tester. It does not write unique exploits from scratch, but rather combines known methods and dynamically adapts them to the situation, handling the tools’ errors on its own.

Since the actions performed by an AI agent on the network are indistinguishable from those of a human, classic, well-tuned correlation and behavioral analysis rules are sufficient to detect it. Here are a few examples of how Kaspersky Next EDR Expert successfully detects the attack described:

• To detect the execution of a malicious script via a remote scheduled task, you need to monitor the creation of the schtasks.exe process with the /s argument. EDR Expert detects this activity using the rules create_task_on_remote_host_using_standard_tool, scheduled_task_creation_as_system_via_schtasks, and scheduled_task_with_powershell_execution.
  
• During the attack, the adversary will need access to the victim’s credentials; in the described case, one way to obtain them was through a well-known technique that uses legitimate tools to dump LSASS, specifically by calling the MiniDump function from comsvcs.dll. The EDR Expert solution detects this activity using the rules dumping_memory_with_com_services_dll and suspicious_lsass_memory_access.
  
• A significant part of the attack chain is lateral movement, which helps the attacker navigate within the infrastructure and achieve their desired objectives. In the described case, the WinRM protocol is used to initiate connections directly from PowerShell. This is a standard technique that allows the attacker to execute commands on remote machines without using additional network tunnels. The EDR Expert solution detects this activity using the rules using_powershell_for_remote_execution_via_wmi and winrm_send_command.
  

Kaspersky Anti Targeted Attack (KATA) is used to detect malicious activity in network traffic. Communication between CyberStrikeAI agents and the command-and-control server occurs without accessing AI platforms such as ChatGPT or Claude. Instead, the agent’s C2 server is an infrastructure pre-configured by the attackers, just as in attacks that do not use AI agents. Analysis of decrypted network traffic using NDR-class solutions reveals characteristic communication patterns of CyberStrikeAI agent activity. When these patterns are detected, KATA generates an alert with the verdict Backdoor.CyberStrikeAI.HTTP.C&C.

To detect post-exploitation activity, you can use not only IDS technology but also NAD (Network Anomaly Detection). It analyzes all traffic for suspicious indicators that do not correspond to a node’s typical network activity.

For example, actions performed by CyberStrikeAI during the Domain Discovery phase are detected by an NDR:NAD rule named “Scanning domain records via LDAP queries.”

You can learn more about NDR:NAD technology in our article on Securelist.

You can also visualize the connections between C2 addresses and files used by attackers in the Research Graph section of the Kaspersky Threat Intelligence Portal. This includes tracking the emergence of new CyberStrikeAI implants that communicate with malicious addresses.

In addition, the Threat Lookup service available on the portal allows you to determine whether malicious files belong to CyberStrikeAI using attribution mechanisms based on the executable file’s code.

Kaspersky SIEM detects all stages of an attack by the CyberStrikeAI agent. The product repository contains over 100 rules for detecting the techniques discussed in this article; we will list the most critical ones below.

Execution of various commands from the sqlservr.exe process:

• R300_04_Windows shell started by a web application

Downloading and executing a payload via PowerShell:

• R110_03_PowerShell code downloaded and executed

Creating Windows scheduled tasks:

• R099_04_Suspicious arguments when running schtasks.exe
• R300_03_Windows shell started by the scheduler

Persisting via crontab or bashrc:

• R099_06_Suspicious cron job activity
• R405_02_UNIX shell configuration modification

Rules located at the KUMA Packages/SOC package/Configuration discovery path detect the collection of information about hosts, network settings, and domains using various reconnaissance tools. Rules that aggregate detections by reconnaissance tools:

• R224_14_Windows reconnaissance activity
• R224_09_System information discovery by running multiple utilities within a short period
• R224_04_System information discovery via standard Linux tools

Data collection for Kerberoasting and AS-REP Roasting:

• R034_01_Multiple TGS ticket requests (Kerberoasting)
• R452_18_AS-REP Roasting

Dumping registry hives containing credentials using the reg.exe utility:

• R230_02_Copying data containing credentials from the Windows registry

Dumping the lsass.exe process using the MiniDump function of the comsvcs.dll library:

• R233_04_Process memory dump via comsvcs.dll
• R262_Suspicious access to the LSASS process

DCSync and Golden Ticket attacks using the renamed mimikatz utility:

• R073_DC Sync attack
• R450_41_Golden Ticket Attack
• R100_03_Traces of Mimikatz use via cmd

Lateral movement using WMIExec:

• R460_08_Lateral movement using WMIexec Impacket
• R460_09_Lateral movement using WMIExec and Impacket

For the rules to work, you must configure the SIEM system to receive the relevant events:

• Process launches (Windows security log – 4688, auditd – execve) and PowerShell commands (4104)
• User logins to the system (Windows security log – 4624, 4768, 4769)
• Various object manipulations (Windows security log – 4662, 4663, 4656; auditd – openat)
• Interaction with shared resources (Windows security log – 5145)

Indicators of compromise

File-based indicators:

CyberStrikeAI Windows Beacon
D726A8B4886C636F76CA6D30EF6A6FF4	c:\windows\temp\svchosts.exe
2770562d104391b92b42671c270079bb	c:\windows\temp\svcmon32.exe c:\programdata\svcmon32.exe
CyberStrikeAI Linux Beacon
09e1da2afa1216ecc55648ec8e122d2a
805B9E4AE74C903787416800999B8418
Tools & Scripts
29EFD64DD3C7FE1E2B022B7AD73A1BA5	C:\Windows\Temp\wdiag2.exe (mimikatz)
74F57B3E897A4960DCDD5B7E8A54F9DF	c:\rwx\RogueWinRM.exe
0BBD08AF95F877F1D568B03DE2EB76B4	c:\ProgramData\p1.ps1 (reverse shell PS script)

Network indicators:

185.186.245[.]144	C2 for Windows Beacon
fastcdn[.]bar	C2 for Windows Beacon
media.fastcdn[.]bar	C2 for Linux Beacon
104.234.26[.]163	C2 for Payload Delivery + Linux Beacon