Introduction

As part of proactive threat monitoring, Kaspersky’s Cyber Threat Intelligence team identified a malicious campaign involving C2 agents controlled by artificial intelligence. Confirmed victims of the campaign included organizations in the education sector in several countries across Africa and Latin America. CyberStrikeAI played a key role in the post-exploitation phase. This is an open-source framework in which an LLM orchestrator on the command-and-control server plans actions, selects tools, and generates commands, while an implant executes them on compromised hosts. Using CyberStrikeAI, the attackers progressed from reconnaissance to full domain compromise.

According to our data, this is one of the first public descriptions of a compromise involving an LLM in the wild. The campaign we discovered clearly illustrates how the role of AI in attackers’ arsenals is evolving: until recently, language models were used primarily during preparatory stages – for writing phishing emails, debugging code, or searching for vulnerabilities. Now, however, they are being embedded into the very core of the attack, automating actions at every stage: payload execution, persistence on the host, discovery, lateral movement, and, finally, data collection and exfiltration. Post-exploitation – the stage that traditionally required manual work by an experienced operator – plays a particularly significant role here.

A key feature of the scheme using the CyberStrikeAI framework is that the implant ceases to be a simple tool for executing the operator’s commands. Decisions are distributed across two levels: the operator defines the task in general terms, while the model determines how to execute it – specifically, which commands to send to the host and in what sequence. Thus, the strategic planning remains with the human, while the choice of technical steps is delegated to the model, and the implant executes the model’s decisions.

To understand how this scheme works in practice, let’s examine the chain of actions taken by the attackers, as reconstructed by our analysts during the incident investigation.

Timeline of the attack

Let’s examine the timeline of the attack using an example from one incident within the detected campaign.

The first phase follows a standard approach: a human operator gains access to the victim’s infrastructure via a compromised SQL Server (version 16.0.1000), then collects basic information about the host, deploys tools, and conducts network reconnaissance. All of this activity takes nearly a day, followed by a two-week pause.

The second phase is fundamentally different. The first step involves deploying the CyberStrikeAI C2 agent, which receives commands from a server-based LLM orchestrator. During the second phase, the agent performs the following:

• establishing persistence and conducting local reconnaissance within 2 minutes;
• conducting domain reconnaissance over the next 5 hours;
• after a brief pause of several days, moving on to the final stage – lateral movement via SMB and WMI, mass credential dumping on hosts, and database export – with the entire operation taking no more than one hour.

We’ll discuss these stages in more detail in the next section.

Technical details

CyberStrikeAI overview

CyberStrikeAI is an open-source, modular platform written in Go for automating penetration testing. Its key feature is combining LLM-based attack orchestration and a built-in C2 server with agents (beacons) within a single server process.

The entire “intelligent” layer is isolated on the control server. C2 functions (calling reconnaissance and exploitation utilities, managing webshell connections, assigning tasks to agents, and reading results) are available to the model as MCP tools. The implant is a classic C2 agent with no AI functionality – no API keys, no calls to AI service APIs, and no autonomous logic. It periodically polls the listener server via HTTP/S, TCP, or WebSocket, executes shell commands, and interacts with the file system. To the victim, this activity looks like a typical remote-control session, where a server-side LLM orchestrator queues tasks instead of a live operator. The LLM influences how decisions are made, but not how the corresponding commands are delivered to the host.

Although CyberStrikeAI is publicly available, specific instances of the framework can be linked to specific attackers or campaigns. Detection and attribution are possible based on the following artifacts:

• Control panel: Upon launch, a self-signed TLS certificate is generated, with the framework’s name appearing in the issuer and subject fields. The certificate is created in memory at each startup, so the not_before field effectively records the time the process was launched. Accordingly, as with Cobalt Strike, the chronology of restarts can be reconstructed from the scan history.
  

  CyberStrikeAI control panel’s self-signed TLS certificate

• Implant: The build metadata (go version -m) contains a path to the main package, which includes data pointing to the built-in CyberStrikeAI generator – a temporary directory with the build identifier. This path is identical for all payloads, making it a reliable signature. Additionally, the build info field contains version control system metadata, which can be used to compare samples against one another.
• Authentication: When communicating with the server, the implant sends an X-Implant-Token header with a fixed value in the HTTP request. The token is unique to each C2 server and is embedded into the malicious payload during the build phase; therefore, it serves as both a network indicator and a sign that the samples belong to the same server.

It should be noted that the implant version does not reflect the server version. The implant can operate for months while the operator updates the server-side components: listener configurations and keys are preserved during updates. In the incidents we detected, we observed the use of a single agent version throughout the entire incident. In such cases, the sample’s build date may indicate the earliest possible deployment date of the CyberStrikeAI infrastructure, but it still does not provide an estimate of the compromise duration.

Execution & Privilege Escalation

The first malicious commands on the victims’ systems in the campaign under investigation originated from the sqlservr.exe process, indicating the likely initial access vector and the context in which the attackers gained the ability to execute code. It is important to note that the commands marked as having been executed prior to agent installation were executed manually by the attacker specifically within the context of this process. At this stage, we are not yet dealing with automated implant activity, but rather with manual actions by the operator.

Before launching the agent on the machines, the attackers checked for its presence using a PowerShell script, from which we can deduce its default deployment paths: C:\Windows\Temp\, C:\Windows\, C:\ProgramData\, C:\Temp. At the same time, the attacker can disguise the agent’s name as that of a legitimate system process. In the example below, it mimics svchost.exe (svchosts.exe)

Like most C2 agents for Windows, CyberStrikeAI uses PowerShell to execute its payload. When a request is received from the operator, the commands to be executed are additionally encoded in Base64 to bypass keyword-based detection.

Decoded form of the command:

When administrative privileges were available (for example, a domain administrator account), instead of executing commands directly, the agent on remote hosts often created scheduled tasks so that the malicious payload would run with SYSTEM privileges:

An alternative method that does not use schtasks utility is to create a task via the Schedule.Service COM object:

The payload (p1.ps1) from the example above is a reverse shell that connects to the server at 185.186.245[.]144:5501:

The p1.ps1 payload and similar scripts were distributed across the network using shared network administrative folders and the WMI protocol, which we will describe in more detail in the Lateral Movement section.

Stealth

In addition to encoding commands in Base64 and obfuscating SQL/LDAP queries – which we will describe in the Collection & Exfiltration and Discovery sections, respectively – the attackers split the malicious payload into multiple files. It is noteworthy that the scripts were transmitted in this manner even before the agent was installed – that is, at a stage where human intervention is typically required – yet they clearly bear the hallmarks of being generated by an LLM.

Below is a sequential record of several script fragments written to the file d3.b64.

Subsequently, the attackers used the certutil utility to decode the resulting file and executed it with the following command:

Once assembled and decoded, the script’s contents looked like this:

The script is a tool for decrypting DPAPI secrets from the file C:\ProgramData\dsn_line.txt. This file, in turn, is populated by the following command, which searches for a DSN string containing connection settings in the SQL Server Reporting Services configuration file rsreportserver.config and copies its contents to dsn_line.txt.

It is worth noting that some of the scripts delivered and executed as described above contain comments in Chinese (##  –  researcher’s comments).

Persistence

If the CyberStrikeAI implant was successfully delivered, the first step was to establish persistence on the target system. To do this, the agent created a scheduled task named SystemUpdate, which specified the path to the implant as the action to be performed:

Analysis of the framework’s source code revealed an alternative method of persistence: by adding a value to the registry key HKCU\Software\Microsoft\Windows\CurrentVersion\Run, where the name of the created value matches the task name (SystemUpdate).

Agent persistence on Linux systems is also implemented in two ways – by adding the entry @reboot <path_to_beacon> & to the user’s crontab (in which case the process runs at system startup), or by adding the line (nohup <path_to_beacon> &>/dev/null &) to ~/.bashrc (in which case the agent starts when an interactive bash shell is opened).

It is worth noting that the choice of a specific persistence method is delegated to the LLM connected to CyberStrikeAI. However, thanks to the human-in-the-loop (HITL) mechanism, the operator retains full control over the process: commands generated by the model may require manual approval or correction before they are executed.

Discovery

Local Discovery

Before installing the agent on a compromised host, the attackers manually gathered basic system information using a fairly trivial set of commands:

The attackers also manually checked for internet access and obtained the external IP addresses of the compromised machines using the Chinese service dnslog[.]cn. The service generates a random third-level domain, after which the attackers attempt to resolve it on the compromised machine.

If the machine has internet access, the request succeeds, and the attackers obtain the external IP address of the compromised device on the service’s page.

For reconnaissance purposes, the agent generates a more complex script designed to map out a path for further privilege escalation by compromising SCCM or exploiting msiexec (the AlwaysInstallElevated key):

Additionally, to find ways to elevate privileges locally, the agent executed scripts to inventory services running under domain accounts and tasks running under the SYSTEM account:

During their activity, the attackers periodically checked for Microsoft Defender detections:

Remote Discovery

After gathering information about the compromised host, the attackers proceeded to conduct reconnaissance within the network. During the preparatory phase of the attack, they manually collected additional information about remote hosts using the net.exe utility.

During the main phase, the agent used PowerShell’s built-in functionality to detect accessible hosts without relying on additional utilities (such as nmap or fscan):

Additionally, relevant LDAP queries to Active Directory objects helped build a network map:

Furthermore, the presence of the installed agent on remote hosts was verified using WMI:

Domain Discovery

The next step was to gather information about the victims’ domains. To this end, before installing the agent, the attackers used standard OS utilities:

However, later on, using the CyberStrikeAI implant, reconnaissance was carried out via generated PowerShell scripts:

In addition to basic domain information, the agent performed LDAP queries to gather information for Kerberoasting and AS-REP Roasting attacks:

Finally, the agent was used to check the domain for the presence of LAPS and Microsoft Azure:

To detect signs of Microsoft Azure usage within the infrastructure, the attackers also searched for the .azcopy directory – created by the AzCopy (Microsoft Azure Storage Copy) utility – in users’ home directories:

Credential Access

After successfully conducting reconnaissance and mapping the network, the attackers moved on to the next stage – dumping credentials. For this purpose, the agent used a classic set of LOLBINs and well-known third-party tools.

The agent dumped registry hives containing credentials using the reg.exe utility:

The agent dumped the lsass.exe process using the MiniDump function of the comsvcs.dll library. In doing so, the target process’s PID was used instead of its name to make static detection based on the command line more difficult:

After successfully compromising privileged domain accounts (specifically, the built-in domain administrator), the attackers also carried out DCSync and Golden Ticket attacks via the agent using a renamed version of the mimikatz utility:

Lateral Movement

To spread across the network using compromised accounts, the attackers employed utilities from the Impacket toolkit, specifically WMIExec, as indicated by the utility’s characteristic command line:

Once installed, the agent prefers to use standard OS mechanisms, such as shared network folders.

Another method the agent uses to remotely execute commands is the WMI protocol. In particular, the agent used it to distribute the aforementioned p1.ps1 reverse shell script. This involved using compromised user accounts with local administrator privileges on the target hosts:

A second method of lateral movement via WMI uses the Invoke-CimMethod cmdlet:

Command & Control

To deliver the aforementioned tools (malicious scripts, mimikatz, and the agent itself) to the initial nodes in the infection chain, the attackers used standard OS utilities:

After the agent is installed, it checks the availability of the C2 server’s ports. The implementation mechanisms here are virtually unlimited and depend on the “creativity” of the respective LLM agents connected to the server:

To download additional utilities, the CyberStrikeAI implant also used built-in utilities (LOLBINs). The tools could be hosted on the attackers’ own servers or downloaded directly from GitHub:

Collection & Exfiltration

The data collection phase deserves special attention. It demonstrates yet another capability of LLM orchestration – the automatic generation of SQL and LDAP queries tailored to a specific task.

In one incident during the campaign, the attackers deployed the CyberStrikeAI implant on an educational organization’s SQL server and collected information from the database via PowerShell. Here is an example of a command executed by the agent:

Normalized view of the executed script with comments:

Before accessing the data, the agent checked the privileges of the account under which it connected to the database:

In decoded form, the check looks as follows:

On network resources, file collection was preceded by a recursive directory scan to identify files of interest.

To interact with the file system, the implant provides a built-in interface that supports direct uploading and downloading of files. Files are transferred directly via the main encrypted communication channel with the C2 server (HTTP or TCP), and the data itself is encoded in Base64 and packaged into the agent’s standard JSON responses.

Another built-in capability of the implant is taking screenshots of the infected machine. As with other actions, the implant does not initiate this on its own: the command to capture the screen is issued by the LLM orchestrator, and the agent merely executes it and returns the result via the same control channel.

On Windows, the command for taking screenshots looks like this:

The Linux version looks like this:

In the incidents we detected, data collection was the final stage of the attack: the chain ended there, and we observed no further activity.

Attribution

The key artifact for attribution in this campaign is the implant’s build metadata. The attackers built the malicious payload inside a Git clone of the project, so the Go compiler embedded version control system information into the binary files – the hash and commit time, as well as the vcs.modified=true flag (analogous to the +dirty suffix) – indicating uncommitted local changes in the working copy. The combination of these fields forms a unique fingerprint for a specific build.

Based on this fingerprint, the samples are divided into two independent groups, in each of which the Windows implant and the Linux implant have completely identical build metadata. A match indicates that, within each group, both payloads were built from the same project working copy.

However, these groups do not overlap with one another. They do not share a common C2 infrastructure, and different versions of CyberStrikeAI are deployed on the command-and-control servers. In other words, the build metadata reliably links the samples within each group but does not provide grounds for linking the two groups together.

The available data does not allow us to link the activity to any known group of attackers, nor to state with certainty that the same operator is behind both campaigns. Two factors prevent this. First, the tool’s openness: CyberStrikeAI is publicly available, so different operators could have independently deployed it and assembled malicious payloads under similar conditions. Second, command generation by the model: the “signature” characteristic of a specific operator is largely shaped not by a human but by an LLM. On the one hand, this increases the diversity of commands: the same command, when generated multiple times, can look different. On the other hand, it strips them of their individual characteristics, which reduces the value of behavioral metrics for attribution.

However, the Chinese-language comments found in the attackers’ scripts and the use of Chinese services still suggest a connection between the activity and a Chinese-speaking operator. In addition, analysts noted the timing of the control servers’ restarts: since the self-signed TLS certificate is regenerated each time the process starts, its not_before field records the restart time, and most of these restarts occurred during business hours in the UTC+8 time zone.

The origin of the tool itself also indirectly points in the same direction: CyberStrikeAI was developed within the Chinese cybersecurity community and is well known there.

In summary

CyberStrikeAI is a telling – though not unique – example of a shift occurring within the class of C2 frameworks: the LLM orchestrator is no longer merely an add-on to reconnaissance but has become a control layer over post-exploitation. If HexStrike AI and similar tools cover the “find and break” phase, and Sliver/Mythic/Havoc cover the “establish a foothold and control” phase, CyberStrikeAI completes the kill chain: a single server-side process written in Go executes utilities via MCP, handles webshell connections, and assigns tasks to the implant, while the model analyzes the results and decides what to do next.

The key takeaway is that the introduction of AI into the attack chain does not yet present fundamentally new challenges for detection. All the “intelligent” work remains on the attacker’s side, while the compromised host is subjected to familiar actions: from reconnaissance via Kerberoasting and AS-REP Roasting to LSASS dumps, DCSync, and the Golden Ticket attacks. This is a typical, well-documented set of domain compromise techniques. The novelty of the attack lies not in the methods themselves, but in the speed and ease with which they were executed: AI orchestration has lowered the skill requirements for the operator, but has not taken the attack beyond what defenders already know and are capable of detecting. The timing is also telling: individual key phases of the activity (such as establishing a foothold, lateral movement, and obtaining credentials) took only a few hours, and the entire attack – from agent deployment to the compromise of domain administrators – was completed within 3–4 days.

However, the CyberStrikeAI architecture does not limit users to the scenario described. The same mechanisms allow for the on-demand assembly of more complex chains – including DPAPI secret extraction and attacks on SCCM and Azure IMDS – all of which are within reach of the same group of actors, with a relatively low skill barrier. As the models evolve, the gap between the complexity of orchestration and the level of techniques used will narrow, and the operator’s role will gradually shift from setting tasks to monitoring the model’s actions.

Detection by Kaspersky solutions

It may seem that attacks using AI agents require the creation of fundamentally new detection rules. Indeed, to detect the activity of an LLM agent installed on a host within the infrastructure, it is necessary to create detection logic based on the specific characteristics of the agents. Detection rules for this activity can be found using Hunt Hub with the following filter.

However, in the case of the attack described, a different logic applies. The main difference lies in the architecture of the attack itself: the LLM agent was not located within the corporate network perimeter. It operated remotely via a C2 agent, orchestrating actions, and left no traces of its presence in the infrastructure (such as specific API requests to local LLMs or anomalous patterns of resource consumption by hosts).

The key difference between this activity and an attack by an experienced human operator lies largely in speed. Tactically, technically, and methodologically, AI, for the most part, uses exactly the same tools, utilities, and techniques as a human penetration tester. It does not write unique exploits from scratch, but rather combines known methods and dynamically adapts them to the situation, handling the tools’ errors on its own.

Since the actions performed by an AI agent on the network are indistinguishable from those of a human, classic, well-tuned correlation and behavioral analysis rules are sufficient to detect it. Here are a few examples of how Kaspersky Next EDR Expert successfully detects the attack described:

• To detect the execution of a malicious script via a remote scheduled task, you need to monitor the creation of the schtasks.exe process with the /s argument. EDR Expert detects this activity using the rules create_task_on_remote_host_using_standard_tool, scheduled_task_creation_as_system_via_schtasks, and scheduled_task_with_powershell_execution.
  
• During the attack, the adversary will need access to the victim’s credentials; in the described case, one way to obtain them was through a well-known technique that uses legitimate tools to dump LSASS, specifically by calling the MiniDump function from comsvcs.dll. The EDR Expert solution detects this activity using the rules dumping_memory_with_com_services_dll and suspicious_lsass_memory_access.
  
• A significant part of the attack chain is lateral movement, which helps the attacker navigate within the infrastructure and achieve their desired objectives. In the described case, the WinRM protocol is used to initiate connections directly from PowerShell. This is a standard technique that allows the attacker to execute commands on remote machines without using additional network tunnels. The EDR Expert solution detects this activity using the rules using_powershell_for_remote_execution_via_wmi and winrm_send_command.
  

Kaspersky Anti Targeted Attack (KATA) is used to detect malicious activity in network traffic. Communication between CyberStrikeAI agents and the command-and-control server occurs without accessing AI platforms such as ChatGPT or Claude. Instead, the agent’s C2 server is an infrastructure pre-configured by the attackers, just as in attacks that do not use AI agents. Analysis of decrypted network traffic using NDR-class solutions reveals characteristic communication patterns of CyberStrikeAI agent activity. When these patterns are detected, KATA generates an alert with the verdict Backdoor.CyberStrikeAI.HTTP.C&C.

To detect post-exploitation activity, you can use not only IDS technology but also NAD (Network Anomaly Detection). It analyzes all traffic for suspicious indicators that do not correspond to a node’s typical network activity.

For example, actions performed by CyberStrikeAI during the Domain Discovery phase are detected by an NDR:NAD rule named “Scanning domain records via LDAP queries.”

You can learn more about NDR:NAD technology in our article on Securelist.

You can also visualize the connections between C2 addresses and files used by attackers in the Research Graph section of the Kaspersky Threat Intelligence Portal. This includes tracking the emergence of new CyberStrikeAI implants that communicate with malicious addresses.

In addition, the Threat Lookup service available on the portal allows you to determine whether malicious files belong to CyberStrikeAI using attribution mechanisms based on the executable file’s code.

Kaspersky SIEM detects all stages of an attack by the CyberStrikeAI agent. The product repository contains over 100 rules for detecting the techniques discussed in this article; we will list the most critical ones below.

Execution of various commands from the sqlservr.exe process:

• R300_04_Windows shell started by a web application

Downloading and executing a payload via PowerShell:

• R110_03_PowerShell code downloaded and executed

Creating Windows scheduled tasks:

• R099_04_Suspicious arguments when running schtasks.exe
• R300_03_Windows shell started by the scheduler

Persisting via crontab or bashrc:

• R099_06_Suspicious cron job activity
• R405_02_UNIX shell configuration modification

Rules located at the KUMA Packages/SOC package/Configuration discovery path detect the collection of information about hosts, network settings, and domains using various reconnaissance tools. Rules that aggregate detections by reconnaissance tools:

• R224_14_Windows reconnaissance activity
• R224_09_System information discovery by running multiple utilities within a short period
• R224_04_System information discovery via standard Linux tools

Data collection for Kerberoasting and AS-REP Roasting:

• R034_01_Multiple TGS ticket requests (Kerberoasting)
• R452_18_AS-REP Roasting

Dumping registry hives containing credentials using the reg.exe utility:

• R230_02_Copying data containing credentials from the Windows registry

Dumping the lsass.exe process using the MiniDump function of the comsvcs.dll library:

• R233_04_Process memory dump via comsvcs.dll
• R262_Suspicious access to the LSASS process

DCSync and Golden Ticket attacks using the renamed mimikatz utility:

• R073_DC Sync attack
• R450_41_Golden Ticket Attack
• R100_03_Traces of Mimikatz use via cmd

Lateral movement using WMIExec:

• R460_08_Lateral movement using WMIexec Impacket
• R460_09_Lateral movement using WMIExec and Impacket

For the rules to work, you must configure the SIEM system to receive the relevant events:

• Process launches (Windows security log – 4688, auditd – execve) and PowerShell commands (4104)
• User logins to the system (Windows security log – 4624, 4768, 4769)
• Various object manipulations (Windows security log – 4662, 4663, 4656; auditd – openat)
• Interaction with shared resources (Windows security log – 5145)

Indicators of compromise

File-based indicators:

CyberStrikeAI Windows Beacon
D726A8B4886C636F76CA6D30EF6A6FF4	c:\windows\temp\svchosts.exe
2770562d104391b92b42671c270079bb	c:\windows\temp\svcmon32.exe c:\programdata\svcmon32.exe
CyberStrikeAI Linux Beacon
09e1da2afa1216ecc55648ec8e122d2a
805B9E4AE74C903787416800999B8418
Tools & Scripts
29EFD64DD3C7FE1E2B022B7AD73A1BA5	C:\Windows\Temp\wdiag2.exe (mimikatz)
74F57B3E897A4960DCDD5B7E8A54F9DF	c:\rwx\RogueWinRM.exe
0BBD08AF95F877F1D568B03DE2EB76B4	c:\ProgramData\p1.ps1 (reverse shell PS script)

Network indicators:

185.186.245[.]144	C2 for Windows Beacon
fastcdn[.]bar	C2 for Windows Beacon
media.fastcdn[.]bar	C2 for Linux Beacon
104.234.26[.]163	C2 for Payload Delivery + Linux Beacon

Introduction

AI agents and associated tooling are becoming increasingly common in corporate infrastructure. Agents can perform a range of actions with the user’s privileges, such as accessing data, running commands, and interacting with external services. This creates new security risks, especially when these tools are used without the security team’s oversight or well-designed policies.

Detecting, tracking, and controlling AI agents is becoming one of the most pressing tasks for security teams today. We closely follow technological developments and continuously update our solutions to respond to new threats in a timely manner amid a rapidly changing technology landscape. This post describes new expertise built into Kaspersky products that helps counter the threats posed by the proliferation of AI agents. We approach this problem from several angles.

First, you need to thoroughly understand the threat you are dealing with. To this end, we added profiles to the Kaspersky Threat Intelligence Portal that describe various AI agents and how attackers exploit them. At their core, AI agents are programs (processes) that run in the operating system on endpoints and can also launch other processes. This means that Endpoint Detection and Response solutions are among the key endpoint controls for this threat. These solutions detect the presence and launch of AI agents, track their activity, and identify potentially dangerous behavior. When needed, they also take action, such as stopping a suspicious process, blocking the activity, or isolating the host, to reduce the likelihood of an incident escalating. For this purpose, we developed specially adapted detection rules.

You can use Kaspersky Endpoint Security, now also available as Kaspersky Next, to control and restrict the launch of AI agents. This solution uses two components to detect AI agents and control how they are used. Application Control categorizes the application processes launched on endpoints, and Web Control manages access to specific categories of web resources for users on endpoints.

Finally, even harmless AI agents can contain malicious instructions (skills), such as those downloaded from unsafe external sources. Kaspersky Scan Engine analyzes installed applications to detect these threats and also checks LLM files for malicious code. Let’s take a closer look at these solutions and technologies.

Popular AI applications and services in organizations

Tools from Anthropic and OpenAI take the top spots in the September 2026 ranking of AI agents by popularity among Kaspersky users. This list is based on telemetry from Kaspersky solutions. It shows the number of users who had the relevant AI vendors’ products installed at the time of the study.

#	AI product
1	Claude
2	Claude Code
3	Codex
4	OpenCode
5	Zed
6	Wispr Flow
7	LM Studio
8	ZCode
9	Chatbox
10	Cherry Studio

The data shows that agentic systems, especially AI agents for software development, are the most popular AI applications. The TOP 10 also includes an application for running large language models locally (LM Studio) and a voice note-taking app (Wispr Flow).

According to open sources, these are the most widely used AI services in 2026:

#	AI service
1	ChatGPT
2	Google Gemini
3	Claude
4	Grammarly
5	DeepSeek

While analyzing the most popular and widely used apps, our experts also noticed a sharp rise in vulnerable versions of AI-related software and services. From 2025 to date, more than 2500 vulnerabilities have been published:

Number of published vulnerabilities in LLMs, AI tools, and plugins with similar functionality, 2025–2026 (download)

* Data for previous quarters was updated and may differ slightly from previously published data.

Application Control and Web Control

To enforce the organization’s security policy for AI agents and other AI applications on the corporate network, Kaspersky products offer application control based on KL categories. These categories classify installed software and give you granular control over which approved applications can run in the organization.

Application Control analyzes the processes launched on endpoints, tracking which AI agents are running in corporate systems at any given moment, on which hosts, and under which accounts. Application Control also shows how long a given program has been in use.

This makes it easier for the Kaspersky Security Center (KSC) administrator to control applications. Administrators can use KL categories to allow or block AI agents inside the company for specific groups of employees.

Here is what this functionality looks like to KSC administrators:

For details on how to configure Application Control in KSC, follow this link.

In Kaspersky Endpoint Security (KES), Application Control can operate in two modes:

• Denylist. In this mode, Application Control lets users run any applications except those blocked by Application Control rules. This is the default mode.
• Allowlist. In this mode, Application Control blocks users from running any applications except those explicitly allowed by Application Control rules.

Below are the steps to configure Application Control to block AI tools.

Configuring Application Control for the AI Tools category in KES

With this setup, when a user tries to launch an AI agent, they get a notification and the agent doesn’t start.

For more on how to configure Application Control in KES, follow this link. Our public portal also lets you explore information on KL categories and the applications that fall under them, in particular details on how AI agents are categorized and how popular they are.

The View applications drop-down list shows products for a specific vendor.

Similarly, Web Control lets you manage user access to web resources. If a user tries to open a denylisted website, KES blocks access and shows a warning.

When configuring access, the administrator can block websites that provide AI as a service.

For more on configuring Web Control, follow this link. The help portal also provides information on website categories that can be assigned to resources to configure access control.

Kaspersky Endpoint Detection and Response

To an EDR solution, an AI agent is a regular process. It has its own executable, a tree of child processes, and network communications, all of which need to be monitored for suspicious activity. An attacker can use an AI agent as an automation tool. An AI agent installed as a legitimate user tool can also be leveraged in a ClickFix attack, where it executes a malicious instruction received from an untrusted source, such as a document, web page, or email. That said, unsafe actions by an agent do not always indicate an attack. There may be no malicious intent in the chain at all. An incident can result from what looks like an ordinary instruction from a user who doesn’t fully understand the consequences of having it executed. The mere fact that an agent was launched does not reveal whether it is being used in an attack. That is why Kaspersky EDR (KEDR) uses both conventional behavioral rules and rules written and adapted to detect AI tools. The latter identify risky agent actions and settings, and help determine which AI tool was involved in suspicious activity.

Conventional KEDR rules detect the vast majority of familiar malicious techniques, including when performed by an AI agent. A suspicious PowerShell launch, persistence via Task Scheduler, or an attempt to steal credentials leaves clear, identifiable traces. These traces look the same no matter what initiated the actions. The rules analyze launch parameters, process relationships, affected files, network activity, and other telemetry events.

For example, in a recent Armored Likho campaign, we found signs that AI had been used to create loader and dropper samples, which were later compiled with NSIS (Nullsoft Scriptable Install System). The key telltale artifacts were icons in the scripts and excessive comments on every function, which is uncharacteristic of human-written code. In addition, the group continues to generate new modules for its BusySnake Stealer and BusySnake RAT samples. For example, the attackers used AI to develop a module that runs multiple checks for virtual environment artifacts and calculates a score. Depending on the score, the sample either runs or exits with code 0. Even though the initial access samples, payloads, and their modules were AI-generated, the commands they execute via rundll32 and PowerShell are detected by the shell_creation_by_rundll32 and suspicious_powershell_cmd_or_script_spawning rules.

So, for detecting an attack like this, it is not important who wrote the loader, the payload, or its modules: they are given away by the commands they execute, process relationships, and other traces of activity in the system. AI can be involved both in preparing the code and in carrying out the attack directly on the device.

In the latter case, the attacker uses the agent to carry out their tasks and lets it choose and run the required commands within the privileges it has. For effective protection, it is critical to link suspicious actions back to the AI tool and the conditions under which it operates. In KEDR, several specialized rules handle this task.

We have created separate rules for popular AI agents, ai_agent_*_access_to_sensitive_file_**, where * is the tool name and ** is the operating system. They generate alerts when an agent accesses files that contain credentials, tokens, or keys.

The ai_agent_dangerous_execution_mode rule detects agents launched with auto-approval of all actions (so-called YOLO mode) or with the sandbox disabled. These settings do not indicate an attack on their own, but they let the agent perform dangerous actions without user confirmation.

The suspicious_mcp_server_artifact rule triggers when MCP server scripts are created or modified in hidden, temporary, or cache directories. Attackers can place an MCP server in these locations to quietly connect it to the agent: through the MCP server, they can pass instructions to the agent, call third-party tools, and access the user’s data.

The llm_api_access_by_unusual_apps rule generates an alert when an application on Windows, Linux, or macOS connects to the API of a known external LLM service, unless this activity falls under predefined exclusions. This helps spot model access by applications that do not normally behave this way.

Some Kaspersky EDR rules tag events for investigation but do not generate alerts. For example, the ai_agent_**_execution rules flag launches of known agents on Windows, Linux, and macOS. The local_ai_model_artifact rule records the creation or modification of AI model files in typical application, runtime, and cache directories. These events reveal AI tools on the device, including tools that run on local models and never call an external API.

Kaspersky Threat Intelligence Portal

AI agent profiles

The Kaspersky Threat Intelligence Portal offers a large number of software profiles, including profiles of AI agents. You can sort them by the ai_ prefix:

The profile of an AI agent such as Claude Desktop includes a detailed description of the software, the privilege level required to run it, supported platforms, and threat actor groups known to use it. It also lists tactics and techniques mapped to the MITRE ATT&CK framework, with descriptions of the procedures the tool can be used for.

The description also lists ways to detect the software through standard system auditing mechanisms:

• Windows: events from standard audit logs and Sysmon events
• Linux: syscall audit events and Sysmon events
• Network auditing: a set of protocols and the traffic generated by the software

The detection section lists the main artifacts the software leaves in the system: command lines, possible launch parameters, names of the services and scheduled tasks it creates, and the key network artifacts.

Hunt Hub

In December 2025, the Kaspersky Threat Intelligence Portal added Hunt Hub (HH), a repository of detection rules. This is a unique Kaspersky project, and we developed it in response to growing market demand.

This functionality is available in the Threat Landscape section of the portal. It gives analysts access to detection rules: their descriptions and their mapping to MITRE ATT&CK tactics and techniques, as well as to the associated cybercriminal groups.

In the Hunt Hub section, customers can explore the detection logic of EDR, NDR, and NGFW products, including the logic for detecting AI agents.

The rule card provides:

• Detailed description
• Rule’s severity level, confidence level, and alert format
• Detection tips
• Description of possible false positives
• Platforms the rule can run on
• Tactics, techniques, and sub-techniques covered by the rule
• Groups that use the technique covered by the rule
• Detection logic that shows what exactly triggers the rule

Kaspersky Scan Engine

Skills are a key component of the AI agent ecosystem. They’re prewritten sets of natural-language instructions that extend agent functionality. We previously covered the risks that malicious skills pose to agent users. A skill can require the usage of additional programs and services, come with helper scripts (for example, written in Python), or contain a malicious command embedded right in the instruction text. This means that adding skills to an originally harmless AI agent opens up several new ways for malicious code to enter the system. To prevent this, any skills obtained from external sources must be scanned. Kaspersky Scan Engine is well suited for this task. This is a cyberthreat detection and response solution that seamlessly integrates with various applications. It can detect malicious code in agent skills, associated scripts, and in files generated by running agents.

Trained LLMs come in many formats. Some of them (PTH, PT, PKL, KERS, and others) also store parameters and weights (training datasets). These files can also contain malicious code, so it’s critical to scan them before running and using them. Kaspersky Scan Engine scans potentially dangerous LLM formats for infected data. It can deserialize and analyze models to detect malicious code regardless of model size.

Conclusion

AI agents are rapidly making their way into corporate environments: they help employees work faster and take on a wide range of tasks, but they also open up new opportunities for attackers. To take advantage of this technology without compromising security, organizations need to build multi-layered protection and minimize risks. A range of Kaspersky solutions can help with this:

• Kaspersky TIP keeps you up to date on current scenarios in which attackers use AI agents, and its Hunt Hub section provides rules for detecting suspicious AI agent activity.
• Kaspersky EDR detects AI agents in the infrastructure and monitors their activity on endpoints. If it detects potentially dangerous actions, the product can log the event, notify the SOC, and take response actions, such as stopping the process or isolating the host.
• Application Control in Kaspersky products can fully restrict the use of AI agents within the company by using application categorization. The Web Control component can restrict access to AIaaS web resources.
• Kaspersky Scan Engine can be integrated into various company processes to detect malicious code in any files, including AI agent skills and LLMs.

When companies combine the tools described above in a comprehensive approach, they can adopt AI agents in an informed way: with an understanding of the associated risks and effective means of minimizing them.